v5.20 - Classic DocuShare Home - Trimble

In the Field 5
You can perform a variety of operations from this menu, including:
creating a new rover file and opening it for logging of data
creating a new base station file and opening it to log data
reopening an existing rover file to log new data, or review and
update existing data
opening a data file transferred from a geographical information
system (GIS) to review and update existing data, or log new
data
The following section describes how to create a new rover file.
5.4.1 Creating a New Data File
When you select Create new file from the Data collection menu, the
Asset Surveyor software displays the Create new file form:
You can accept the default file name suggested by the Asset Surveyor
software, or type a new name into the Filename field. You can also
change the data dictionary that is associated with the data file. If you
have a PC card installed, you can choose whether to store the data file
on the card or on the TSC1 datalogger. Presstto switch between
UTC and local time for the default file name.
TSC1 Asset Surveyor Operation Manual 73