v5.20 - Classic DocuShare Home - Trimble

5 In the Field
B Tip
In the example below, the Bus Stop feature is the highlighted feature.
To choose another Target, highlight a feature or waypoint in the list
and press \. The Target changes to this position:
If you select an area or line feature, you must then specify the start or
end point, or the center of the area, as the position to use.
Once you have selected a Target, the Distance to Go appears at the
bottom of the Navigation screen. This is the distance remaining
between the current GPS position and the Target.
– If you set a feature or waypoint as the Target, and then change its
GPS position, you must select it as the Target again to make the map and
navigation displays use the new position.
You can also create a new waypoint, which you can then set as the
Target, from the currently highlighted feature, the GPS position, or the
location of the map cursor. PressBin the Target menu to create a
waypoint. For more information, see Waypoints, page 135.
Selecting the Start is similar to selecting the Target. PressT,
highlight a feature or waypoint, and press \. The Start is marked
with the Start icon . You can also create waypoints from the Select
start menu.
126 TSC1 Asset Surveyor Operation Manual