v5.20 - Classic DocuShare Home - Trimble

4.9 Configuring the System
Before Leaving the Office 4
Before you take your TSC1 datalogger out into the field and use it to
collect data, you need to check the critical configuration settings in the
Asset Surveyor software.
The Asset Surveyor software can be configured in a large number of
ways. The configuration settings are divided into three classes:
Critical settings: A configuration setting is considered critical
if it affects the quality and usability of GPS positions logged by
the Asset Surveyor software. It is crucial that you check all
critical settings before collecting data or navigating with the
Asset Surveyor software.
Non-critical settings: Settings that affect the behavior of the
Asset Surveyor software but do not have a potentially negative
impact on GPS positions are termed non-critical. You should
still check each non-critical setting before collecting data or
navigating with the Asset Surveyor software, but if you do not
do so, it does not affect the quality of GPS positions logged.
Display settings: Many settings have no impact on the data that
is collected, but merely alter the way data is displayed. You do
not need to change any display settings unless you want data
displayed in a way that differs from the Asset Surveyor
software’s default settings.
TSC1 Asset Surveyor Operation Manual 53