v5.20 - Classic DocuShare Home - Trimble

C
Carrier Phase Data Collection 7
3. Set the Carrier mode field to ‘On’ or ‘Off’ (the default),
depending on your requirements.
When Carrier mode is ‘On’, the Asset Surveyor software logs
carrier measurements that are synchronized with each position
collected. Select ‘On’ when high accuracy data is required.
If further features in a file do not require high accuracy data
logged, and you want to save storage space on the TSC1
datalogger, you can set Carrier mode to ‘Off’.
Warning – Setting Carrier mode to ‘Off’ causes the carrier lock to be lost.
If you later set Carrier mode back to ‘On’, you must make sure that the
carrier lock is maintained for the Minimum time for further features to
achieve the desired accuracy.
If you attempt to switch the Carrier mode from ‘On’ to ‘Off’
during a data collection session, and the Minimum time has not
yet been achieved, the following warning message appears:
This message reminds you that the Minimum time has not been
reached, and that setting Carrier mode to ‘Off’ may result in
preceding features not meeting the required precision.
TSC1 Asset Surveyor Operation Manual 173