v5.20 - Classic DocuShare Home - Trimble

5.7.5 Road Screen
In the Field 5
The Road screen can be accessed by pressing the@softkey from
the Direction Dial screen or, if you used the Road screen last time you
opened the Navigation module, by selecting the Navigation option
from the Main menu.
In the Road screen you navigate by ‘walking’ along a road. A stick
figure represents your current GPS position, and the Target icon
shows the point you are navigating to. The stick figure is always in the
center of the screen:
As in the Direction Dial screen, your heading is represented by the
top center of the screen (the triangle in the direction dial). Your
bearing to go is shown by the direction of the road. The direction of
the road rotates as you change your heading.
To navigate to the Target, turn in the direction of the road until it is
pointing straight ahead and the center line is parallel to the sides of the
screen. Then move towards the Target, keeping the road pointing
straight ahead where possible. As you move closer to the Target the
screen zooms in so the road appears wider.
TSC1 Asset Surveyor Operation Manual 131