ChemOffice.Com - CambridgeSoft

Adding Properties to Property Lists
To add a property to a property list:
Administrator
1. Right-click the within the property list in a
section.
A menu appears.
2. Select Add Property....
The Add Property dialog box appears, listing
the properties you may add.
2. Select Remove Property.
A message appears, asking you if you are sure
you want to remove the property.
3. Click Yes.
The property is removed from the Property
List.
Setting and Editing Values in a Property
List
You can set and edit values for the properties in a
property list, such as the list shown below.
3. Click the property you wish to add. You may
use CTRL+click to select multiple properties,
or SHIFT+click to select a range.
4. Click Add.
The property or properties appear in the list.
You system configuration determines which
properties may be added to the list, and which
properties appear by default.
Removing Properties from a Property List
To remove a property from a property list:
1. Right-click the property you wish to remove
from the Property List .
A menu appears.
To set or edit the value of a property:
1. Click a cell in the property list.
The values you can enter will depend upon the
data type of the specific property.
2. Enter an appropriate value.
Data
type
Date
Text
Number
Action to take
Click the date box, and select a
date and time.
Enter text.
Enter a number. Certain
properties may have default
units associated with them,
which will appear when you
enter a number.SeeWorking
424• Reactions, MS Word, MS Excel, and Other Sections CambridgeSoft
Working with Reaction Sections