10.07.2015 Views

ZONING REGULATIONS OF THE TOWN OF WILTON, CONNECTICUT

ZONING REGULATIONS OF THE TOWN OF WILTON, CONNECTICUT

ZONING REGULATIONS OF THE TOWN OF WILTON, CONNECTICUT

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

29-5.E8. Permitted Uses. The following principal uses shall be permitted in the HODD as amatter of right:a. Multi-family attached dwellings.b. Open space.c. Single-family detached dwellings.9. Area and Bulk Requirements. The HODD shall have the following area and bulkrequirements.a. Minimum Lot Area 9 acresb. Maximum Lot Area 11 acresc. Maximum Density 10 units per gross acred. Percentage of Units Required to be Affordable 30 percente. Minimum Frontage 50 feetf. Minimum Lot Width and Depth 200 feetg. Front Setback 50 feeth. Side Setback – Principal/Accessory 50 feet/25 feetRear Setback – Principal/Accessory50 feet/25 feeti. Minimum Parking and Loading Setbacks 20 feetj. Maximum Stories/Building Height 3½ stories43 feetk. Maximum Unit Size 1,800 square feetl. Maximum Building Coverage(as a percentage 15 percentof lot area)m. Maximum Site Coverage 40 percentn. Maximum Driveway Grade 7 percent 1 / 2 percent1 The Commission may permit increased grades where excessive cuts and/or fill would be required, provided such grades do notexceed 10%. The applicant shall furnish a written opinion from a Connecticut-licensed professional engineer that all proposed gradesare safe for all vehicular and pedestrian traffic anticipated at the site.103

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!