9. Berber, S., Y.K. Kwon, and D. Toma?nek, Unusually High ThermalConductivity of Carbon Nanotubes. Physical Review Letters, 2000.84(20): p. 4613-4616.10. Fei, D., et al., Effects of anisotropy, aspect ratio, andnonstraightness of carbon nanotubes on thermal conductivity ofcarbon nanotube composites. Applied Physics Letters, 2007. 90(2):p. 021914.11. Ishida, H. and S. Rimdusit, Very high thermal conductivityobtained by boron nitride-filled polybenzoxazine. ThermochimicaActa, 1998. 320(1-2): p. 177-186.12. Ohashi, M., et al., Spherical aluminum nitride fillers for heatconductingplastic packages. Journal of the American CeramicSociety, 2005. 88(9): p. 2615-2618.13. Amama, P.B., et al., Dendrimer-assisted controlled growth ofcarbon nanotubes for enhanced thermal interface conductance.Nanotechnology, 2007. 18(38).14. Biercuk, M.J., et al., Carbon nanotube composites for thermalmanagement. Applied Physics Letters, 2002. 80(15): p. 2767.15. Bonnet, P., et al., Thermal properties and percolation in carbonnanotube-polymer composites. Applied Physics Letters, 2007.91(20).16. Borca-Tasciuc, T., et al., Anisotropic thermal diffusivitycharacterization of aligned carbon nanotube-polymer composites.Journal of nanoscience and nanotechnology, 2007. 7(4-5): p. 1581-1588.17. Chai, Y., et al. Low temperature transfer of aligned carbonnanotube films using liftoff technique. in Proceedings - ElectronicComponents and Technology Conference. 2007.18. Chai, Y., et al., Flexible transfer of aligned carbon nanotube filmsfor integration at lower temperature. Nanotechnology, 2007. 18(35).19. Chai, Y., et al. Carbon nanotube/copper composites for via fillingand thermal management. in Proceedings - Electronic Componentsand Technology Conference. 2007.20. Choi, E.S., et al., Enhancement of thermal and electrical propertiesof carbon nanotube polymer composites by magnetic fieldprocessing. Journal of Applied Physics, 2003. 94(9): p. 6034.21. Choi, S.U.S., et al., Anomalous thermal conductivity enhancementin nanotube suspensions. Applied Physics Letters, 2001. 79(14): p.2252.22. Chuang, H.F., et al., Improvement of Thermal Contact Resistanceby Carbon Nanotubes and Nanofibers. Journal of Nanoscience andNanotechnology, 2004. 4(8): p. 964-967.23. Cola, B.A., et al., Photoacoustic characterization of carbonnanotube array thermal interfaces. Journal of Applied Physics,2007. 101(5).24. Cola, B.A., X. Xu, and T.S. Fisher. Design, synthesis, andperformance of a carbon nanotube/metal foil thermal interfacematerial. in Proceedings of the International Conference onIntegration and Commercialization of Micro and Nanosystems2007. 2007.25. Cola, B.A., X. Xu, and T.S. Fisher, Increased real contact inthermal interfaces: A carbon nanotube/foil material. AppliedPhysics Letters, 2007. 90(9).26. Du, F., et al., An infiltration method for preparing single-wallnanotube/ epoxy composites with improved thermal conductivity.Journal of Polymer Science, Part B: Polymer Physics, 2006. 44(10):p. 1513-1519.27. Gojny, F.H., et al., Evaluation and identification of electrical andthermal conduction mechanisms in carbon nanotube/epoxycomposites. Polymer, 2006. 47(6): p. 2036.28. Hu, X., et al. Thermal characterization of vertically-oriented carbonnanotubes on silicon. in Annual IEEE Semiconductor ThermalMeasurement and Management Symposium. 2005.29. Hu, X.J., et al., 3-omega measurements of vertically orientedcarbon nanotubes on silicon. Journal of Heat Transfer, 2006.128(11): p. 1109.30. Hu, X.J., M.A. Panzer, and K.E. Goodson, Infrared microscopythermal characterization of opposing carbon nanotube arrays.Journal of Heat Transfer, 2007. 129(1): p. 91.31. Huang, H., et al., Aligned carbon nanotube composite films forthermal management. Advanced Materials, 2005. 17(13): p. 1652.24-26 September 2008, Rome, Italy32. Hung, M.T., et al., Heat conduction in graphite-nanoplateletreinforcedpolymer nanocomposites. Applied Physics Letters, 2006.89(2).33. Huxtable, S.T., et al., Interfacial heat flow in carbon nanotubesuspensions. Nature Materials, 2003. 2(11): p. 731.34. Lee, T.M., et al. High thermal efficiency carbon nanotube-resinmatrix for thermal interface materials. in Proceedings - ElectronicComponents and Technology Conference. 2005.35. Lee, W.S. and J. Yu, Comparative study of thermally conductivefillers in underfill for the electronic components. Diamond andRelated Materials, 2005. 14(10): p. 1647-1653.36. Liu, C.H., et al., Thermal conductivity improvement of siliconeelastomer with carbon nanotube loading. Applied Physics Letters,2004. 84(21): p. 4248.37. Marotta, E.E., S.J. Mazzuca, and J. Norley, Thermal jointconductance for flexible graphite materials: Analytical andexperimental study. IEEE Transactions on Components andPackaging Technologies, 2005. 28(1): p. 102.38. Moisala, A., et al., Thermal and electrical conductivity of singleandmulti-walled carbon nanotube-epoxy composites. CompositesScience and Technology, 2006. 66(10): p. 1285.39. Ngo, Q., et al. Nano-engineered carbon nanofiber-copper compositethermal interface material for efficient heat conduction. in SurfaceEngineering in Materials Science III - Proceedings of a Symposiumsponsored by the Surface Engineering Committee of the(MPMD) ofthe Minerals, Metals and Materials Society, TMS. 2005.40. Panzer, M., et al. Thermal properties of metal-coated verticallyalignedsingle wall nanotube films. in ThermomechanicalPhenomena in Electronic Systems -Proceedings of the IntersocietyConference. 2006.41. Shaikh, S., K. Lafdi, and E. Silverman, The effect of a CNTinterface on the thermal resistance of contacting surfaces. Carbon,2007. 45(4): p. 695.42. Shaikh, S., et al., Thermal conductivity of an aligned carbonnanotube array. Carbon, 2007. 45(13): p. 2608.43. Smalc, M., et al. Advanced thermal interface materials using naturalgraphite. in Advances in Electronic Packaging. 2003.44. Tong, T., et al., Dense vertically aligned multiwalled carbonnanotube arrays as thermal interface materials. IEEE Transactionson Components and Packaging Technologies, 2007. 30(1): p. 92.45. Wang, H., et al., Synthesis of aligned carbon nanotubes on doublesidedmetallic substrate by chemical vapor deposition. Journal ofPhysical Chemistry C, 2007. 111(34): p. 12617.46. Wu, F., et al., Thermal transport enhancement of multi-walledcarbon nanotubes/ high-density polyethylene composites. AppliedPhysics A: Materials Science and Processing, 2006. 85(1): p. 25.47. Wu, Y., et al., Effects of surface metal layer on the thermal contactresistance of carbon nanotube arrays. Applied Physics Letters,2005. 87(21): p. 1.48. Wu, Y., et al., The carbon nanotube based nanocomposite withenhanced thermal conductivity. Solid State Phenomena, 2007. 121-123: p. 243-246.49. Xu, J. and T.S. Fisher. Thermal contact conductance enhancementwith carbon nanotube arrays. in American Society of MechanicalEngineers, Electronic and Photonic Packaging, EPP. 2004.50. Xu, J. and T.S. Fisher, Enhancement of thermal interface materialswith carbon nanotube arrays. International Journal of Heat andMass Transfer, 2006. 49(9-10): p. 1658.51. Yu, A., et al., Effect of single-walled carbon nanotube purity on thethermal conductivity of carbon nanotube-based composites.Applied Physics Letters, 2006. 89(13).52. Zhang, K., et al. Study on thermal interface material with carbonnanotubes and carbon black in high-brightness LED packaging withflip-chip technology. in Proceedings - Electronic Components andTechnology Conference. 2005.53. Zhang, K., et al., Fabrication of High Thermal Conductivity CarbonNanotube Arrays by Self Assembled Fe3O4 particles. CIRP Annals- Manufacturing Technology, 2007. 56(1): p. 245.54. Zhang, K., et al. Thermal interface material with aligned CNT andits application in HB-LED packaging. in Proceedings - ElectronicComponents and Technology Conference. 2006.©<strong>EDA</strong> <strong>Publishing</strong>/THERMINIC 2008 161ISBN: 978-2-35500-008-9
55. Campbell, R.C., S.E. Smith, and R.L. Dietz, Measurements ofadhesive bondline effective thermal conductivity and thermalresistance using the laser flash method. Annual IEEESemiconductor Thermal Measurement and ManagementSymposium, 1999: p. 83-97.56. Dong, H., L. Fan, and C.P. Wong. Effect of interface on thermalconductivity of polymer composite. in Proceedings - ElectronicComponents and Technology Conference. 2005.57. Fan, L., et al. Electrical and thermal conductivities of polymercomposites containing nano-sized particles. in Proceedings -Electronic Components and Technology Conference. 2004.58. Hill, R.F. and P.H. Supancic, Thermal conductivity of platelet-filledpolymer composites. Journal of the American Ceramic Society,2002. 85(4): p. 851-857.59. Hodgin, M.J. and R.H. Estes, Advanced Boron Nitride epoxyformulations excel in thermal management applications. NationalElectronic Packaging and Production Conference-Proceedings ofthe Technical Program (West and East), 1999. 1: p. 359-366.60. Lee, G.W., et al., Enhanced thermal conductivity of polymercomposites filled with hybrid filler. Composites Part A: AppliedScience and Manufacturing, 2006. 37(5): p. 727-734.61. Ng, H.Y., X. Lu, and S.K. Lau, Thermal conductivity of boronnitride-filled thermoplastics: Effect of filler characteristics andcomposite processing conditions. Polymer Composites, 2005.26(6): p. 778-790.62. Nikkeshi, S., M. Kudo, and T. Masuko, Dynamic viscoelasticproperties and thermal properties of Ni powder-epoxy resincomposites. Journal of Applied Polymer Science, 1998. 69(13): p.2593-2598.63. Xu, Y., D.D.L. Chung, and C. Mroz, Thermally conductingaluminum nitride polymer-matrix composites. Composites - Part A:Applied Science and Manufacturing, 2001. 32(12): p. 1749-1757.64. Yim, M.J., et al. Anisotropic conductive adhesives with enhancedthermal conductivity for flip chip applications. in Proceedings -Electronic Components and Technology Conference. 2004.65. Yim, M.J., H.J. Kim, and K.W. Paik, Anisotropic conductiveadhesives with enhanced thermal conductivity for flip chipapplications. Journal of Electronic Materials, 2005. 34(8): p. 1165-1171.66. Zhou, W., et al., Study on insulating thermal conductive BN/HDPEcomposites. Thermochimica Acta, 2007. 452(1): p. 36-42.67. Zhou, W.Y., et al., Thermally conductive silicone rubber reinforcedwith boron nitride particle. Polymer Composites, 2007. 28(1): p.23-28.68. Deppisch, C., et al., The material optimization and reliabilitycharacterization of an indium-solder thermal interface material forCPU packaging. JOM, 2006. 58(6): p. 67-74.69. Ramaswamy, C., et al. Phase change materials as a viable thermalinterface material for high-power electronic applications. inThermomechanical Phenomena in Electronic Systems -Proceedingsof the Intersociety Conference. 2004.70. Lalena, J.N., M.W. Weiser, and N.F. Dean, Die attach solderdesign. Advanced Packaging, 2002. 11(2): p. 25-30.71. Nurmawati, M.H., K.S. Siow, and I.J. Rasiah, Analysis of phasechange material for use as thermal interface material. InternationalJournal of Polymer Analysis and Characterization, 2004. 9(4): p.213-228.72. Desai, A., J. Geer, and B. Sammakia. A statistical analysis ofthermal interface materials enhanced by vertically aligned carbonnanotubes. in Thermomechanical Phenomena in Electronic Systems-Proceedings of the Intersociety Conference. 2006.73. Desai, A., et al. An analytical study of transport in a thermalinterface material enhanced with carbon nanotubes. inThermomechanical Phenomena in Electronic Systems -Proceedingsof the Intersociety Conference. 2004.74. Desai, A., et al., A numerical study of transport in a thermalinterface material enhanced with carbon nanotubes. Journal ofElectronic Packaging, Transactions of the ASME, 2006. 128(1): p.92.75. Gao, L., X. Zhou, and Y. Ding, Effective thermal and electricalconductivity of carbon nanotube composites. Chemical PhysicsLetters, 2007. 434(4-6): p. 297.24-26 September 2008, Rome, Italy76. Nan, C.-W., et al., Interface effect on thermal conductivity ofcarbon nanotube composites. Applied Physics Letters, 2004.85(16): p. 3549.77. Shenogin, S., et al., Role of thermal boundary resistance on the heatflow in carbon-nanotube composites. Journal of Applied Physics,2004. 95(12): p. 8136.78. Yang, R., G. Chen, and M.S. Dresselhaus, Thermal conductivity ofsimple and tubular nanowire composites in the longitudinaldirection. Physical Review B - Condensed Matter and MaterialsPhysics, 2005. 72(12): p. 1.79. Fan, H., K. Zhang, and M.M.F. Yuen. Investigation of carbonnanotube performance under external mechanical stresses andmoisture. in EuroSime 2007: International Conference on Thermal,Mechanical and Multi-Physics Simulation Experiments inMicroelectronics and Micro-Systems, 2007. 2007.80. Fan, H., K. Zhang, and M.M.F. Yuen. Thermal performance ofcarbon nanotube-based composites investigated by moleculardynamics simulation. in Proceedings - Electronic Components andTechnology Conference. 2007.81. Mahajan, S., et al. Molecular dynamics simulations of nanotubepolymercomposites for use as thermal interface material. inAmerican Society of Mechanical Engineers, Electronic andPhotonic Packaging, EPP. 2003.82. Song, Y.S. and J.R. Youn, Evaluation of effective thermalconductivity for carbon nanotube/polymer composites using controlvolume finite element method. Carbon, 2006. 44(4): p. 710-717.83. Gowda, A., et al. Voids in thermal interface material layers andtheir effect on thermal performance. in Proceedings of 6thElectronics Packaging Technology Conference, EPTC 2004. 2004.84. Gowda, A., et al. Micron and sub-micron scale characterization ofinterfaces in thermal interface material systems. inThermomechanical Phenomena in Electronic Systems -Proceedingsof the Intersociety Conference. 2004.85. Gowda, A., et al., Micron and submicron-scale characterization ofinterfaces in thermal interface material systems. Journal ofElectronic Packaging, Transactions of the ASME, 2006. 128(2): p.130-136.86. Grujicic, M., C.L. Zhao, and E.C. Dusel, The effect of thermalcontact resistance on heat management in the electronic packaging.Applied Surface Science, 2005. 246(1-3): p. 290-302.87. Mukadam, M., et al. Effects of assembly process variables onvoiding at a thermal interface. in Thermomechanical Phenomena inElectronic Systems -Proceedings of the Intersociety Conference.2004.88. Lasance, C.J.M., et al. Challenges in thermal interface materialtesting. in Annual IEEE Semiconductor Thermal Measurement andManagement Symposium. 2006.89. Lasance, C.J.M. The urgent need for widely-accepted test methodsfor thermal interface materials. in Annual IEEE SemiconductorThermal Measurement and Management Symposium. 2003.90. http://www.electrovac.com/servlet/com.itmr.waw.servlet.FileViewer?sprachid=2&kid=221628&pid=229831&fid=229840&kdid=160108 (last checked on 080215)91. http://www.btechcorp.com/attalm2.htm (last checked on 080215)92. Carlberg, B., Wang, T., Fu, Y., Liu, J., Shangguan, D.,Nanostructured Polymer-Metal Composite for Thermal InterfaceMaterial Applications. in Electronic Components and TechnologyConference. ECTC ’08. Proceedings. 58th, 2008, p. 191-197.93. R. Linderman, T. Brunschwiler, U. Kloter, B. Michel,Hierarchically nested surface channels for reduced particle stackingand low thermal resistance interfaces. in SemiTherm Symposium,San Jose, CA, 2007.©<strong>EDA</strong> <strong>Publishing</strong>/THERMINIC 2008 162ISBN: 978-2-35500-008-9
- Page 1 and 2:
http://cmp.imag.fr/conferences/ther
- Page 3 and 4:
24-26 September 2008, Rome, Italy©
- Page 5 and 6:
24-26 September 2008, Rome, Italy©
- Page 7 and 8:
24-26 September 2008, Rome, Italy©
- Page 9 and 10:
24-26 September 2008, Rome, ItalyBL
- Page 11 and 12:
24-26 September 2008, Rome, ItalySe
- Page 13 and 14:
24-26 September 2008, Rome, ItalyED
- Page 15 and 16:
Staggered Cartesian meshes tolerate
- Page 17 and 18:
VIII. THE CASE FOR MCAD-EMBEDDED EC
- Page 19 and 20:
24-26 September 2008, Rome, ItalyTr
- Page 21 and 22:
solution to the eikonal equation(
- Page 23 and 24:
24-26 September 2008, Rome, ItalyS
- Page 25 and 26:
24-26 September 2008, Rome, ItalyTr
- Page 27 and 28:
24-26 September 2008, Rome, Italyda
- Page 29 and 30:
q (RthΣ, t)q (R th , t )10.80.60.4
- Page 31 and 32:
24-26 September 2008, Rome, ItalyEv
- Page 33 and 34:
24-26 September 2008, Rome, Italy*R
- Page 35 and 36:
24-26 September 2008, Rome, Italy[7
- Page 37 and 38:
24-26 September 2008, Rome, ItalyNe
- Page 39 and 40:
24-26 September 2008, Rome, ItalyS=
- Page 41 and 42:
24-26 September 2008, Rome, ItalyVI
- Page 43 and 44:
24-26 September 2008, Rome, Italyth
- Page 45 and 46:
24-26 September 2008, Rome, Italypr
- Page 47 and 48:
24-26 September 2008, Rome, ItalyFi
- Page 49 and 50:
24-26 September 2008, Rome, ItalyPo
- Page 51 and 52:
24-26 September 2008, Rome, ItalyWL
- Page 53 and 54:
24-26 September 2008, Rome, ItalyTa
- Page 55 and 56:
24-26 September 2008, Rome, ItalyII
- Page 57 and 58:
Thermal resistance (K/W)0.250.200.1
- Page 59 and 60:
24-26 September 2008, Rome, ItalyB.
- Page 61 and 62:
temperatrue rise [K]76543210Sim0,00
- Page 63 and 64:
24-26 September 2008, Rome, ItalyCo
- Page 65 and 66:
24-26 September 2008, Rome, ItalyPr
- Page 67 and 68:
24-26 September 2008, Rome, ItalyPr
- Page 69 and 70:
24-26 September 2008, Rome, ItalyBl
- Page 71 and 72:
conclusion, every tile is contacted
- Page 73 and 74:
and B10), three space blocks (W4, W
- Page 75 and 76:
24-26 September 2008, Rome, ItalyMu
- Page 77 and 78:
After having determined the k eff v
- Page 79 and 80:
24-26 September 2008, Rome, ItalyVI
- Page 81 and 82:
24-26 September 2008, Rome, ItalyTh
- Page 83 and 84:
PTjunc24-26 September 2008, Rome, I
- Page 85 and 86:
tures - has been shown previously [
- Page 87 and 88:
24-26 September 2008, Rome, ItalyAu
- Page 89 and 90:
IV.CONCLUSIONSMentor Graphics Exped
- Page 91 and 92:
24-26 September 2008, Rome, ItalyIn
- Page 93 and 94:
III. HEDORIS SIMULATIONSThermal sim
- Page 95 and 96:
24-26 September 2008, Rome, Italytr
- Page 97 and 98:
24-26 September 2008, Rome, ItalyDe
- Page 99 and 100:
24-26 September 2008, Rome, ItalyII
- Page 101 and 102:
datasheets, these values are usuall
- Page 103 and 104:
24-26 September 2008, Rome, Italyte
- Page 105 and 106:
24-26 September 2008, Rome, ItalyCo
- Page 107 and 108:
24-26 September 2008, Rome, Italy20
- Page 109 and 110:
material to handle difficulties suc
- Page 111 and 112:
24-26 September 2008, Rome, ItalyAt
- Page 113 and 114:
24-26 September 2008, Rome, Italymo
- Page 115 and 116:
heatspreaders deposited during the
- Page 117 and 118:
24-26 September 2008, Rome, ItalyTh
- Page 119 and 120:
24-26 September 2008, Rome, Italyla
- Page 121 and 122: Fig. 13 Transient of the output dio
- Page 123 and 124: 24-26 September 2008, Rome, ItalyIn
- Page 125 and 126: chamber to calibrate the thermal te
- Page 127 and 128: V.Table 2: FE-Simulation test-matri
- Page 129 and 130: 24-26 September 2008, Rome, ItalyCo
- Page 131 and 132: 24-26 September 2008, Rome, Italy(c
- Page 133 and 134: Case coverSupercapacitor n°2Electr
- Page 135 and 136: 24-26 September 2008, Rome, Italyfr
- Page 137 and 138: 24-26 September 2008, Rome, ItalyTA
- Page 139 and 140: 24-26 September 2008, Rome, ItalyTh
- Page 141 and 142: 24-26 September 2008, Rome, Italych
- Page 143 and 144: 24-26 September 2008, Rome, ItalyDe
- Page 145 and 146: Peltier control units (PCUs). The t
- Page 147 and 148: 24-26 September 2008, Rome, ItalyTh
- Page 149 and 150: every step: the fewer cells the mor
- Page 151 and 152: TABLE IIEffect of multiplication-bl
- Page 153 and 154: 24-26 September 2008, Rome, ItalyTh
- Page 155 and 156: 24-26 September 2008, Rome, ItalyRe
- Page 157 and 158: Drain source leakage current (A)Rev
- Page 159 and 160: 24-26 September 2008, Rome, ItalyFP
- Page 161 and 162: V IN =V DD /2Fig. 5. Short circuit
- Page 163 and 164: 24-26 September 2008, Rome, ItalyTh
- Page 165 and 166: The overall objective of the NANOPA
- Page 167 and 168: 24-26 September 2008, Rome, ItalyRe
- Page 169 and 170: predictions show that carbon nanotu
- Page 171: 24-26 September 2008, Rome, ItalyFl
- Page 175 and 176: 24-26 September 2008, Rome, ItalyCo
- Page 177 and 178: 24-26 September 2008, Rome, ItalyTh
- Page 179 and 180: 24-26 September 2008, Rome, ItalyEX
- Page 181 and 182: 24-26 September 2008, Rome, Italyen
- Page 183 and 184: 24-26 September 2008, Rome, ItalyKE
- Page 185 and 186: An original three-step etch process
- Page 187 and 188: with a network of built-in sensors
- Page 189 and 190: 24-26 September 2008, Rome, Italyan
- Page 191 and 192: 24-26 September 2008, Rome, ItalyFu
- Page 193 and 194: 24-26 September 2008, Rome, ItalyFi
- Page 195 and 196: 24-26 September 2008, Rome, ItalyFi
- Page 197 and 198: 24-26 September 2008, Rome, ItalyWe
- Page 199 and 200: semiconductors is of the order of 1
- Page 201 and 202: 24-26 September 2008, Rome, ItalyDu
- Page 203 and 204: transistor, through the bulk and be
- Page 205 and 206: impedance behaviour and on the othe
- Page 207 and 208: Tungstenmicro-heaterGas SensingMate
- Page 209 and 210: Tungsten micro-heater resistance (
- Page 211 and 212: 24-26 September 2008, Rome, ItalyPo
- Page 213 and 214: 24-26 September 2008, Rome, ItalyT3
- Page 215 and 216: 24-26 September 2008, Rome, ItalyEv
- Page 217 and 218: 24-26 September 2008, Rome, ItalyD.
- Page 219 and 220: 24-26 September 2008, Rome, ItalyOn
- Page 221 and 222: 24-26 September 2008, Rome, ItalyAc
- Page 223 and 224:
24-26 September 2008, Rome, Italy
- Page 225 and 226:
24-26 September 2008, Rome, ItalyLO
- Page 227 and 228:
24-26 September 2008, Rome, Italymu
- Page 229 and 230:
24-26 September 2008, Rome, Italy(R
- Page 231 and 232:
24-26 September 2008, Rome, ItalyPr
- Page 233 and 234:
24-26 September 2008, Rome, ItalyPa
- Page 235 and 236:
24-26 September 2008, Rome, ItalyEl
- Page 237 and 238:
Temperature rise (°C)1,81,61,41,21
- Page 239 and 240:
i résistances carbone (A)i résist
- Page 241 and 242:
calculates the dissipation distribu
- Page 243 and 244:
in the next. It can also be used to
- Page 245 and 246:
allows creating special methods of
- Page 247 and 248:
OLED device (see Fig. 2.) provided
- Page 249 and 250:
24-26 September 2008, Rome, ItalyFi
- Page 251 and 252:
24-26 September 2008, Rome, ItalyIn
- Page 253:
24-26 September 2008, Rome, ItalyWa