Management Guide - Kamery IP

3Configuring the SwitchWeb – Click SNMP, SNMPv3, Remote Users. Click New to configure a user name.In the New User page, define a name and assign it to a group, then click Add to savethe configuration and return to the User Name list. To delete a user, check the boxnext to the user name, then click Delete.Figure 3-35 Configuring Remote SNMPv3 UsersCLI – Use the snmp-server user command to configure a new user name andassign it to a group.Console(config)#snmp-server user mark group r&d remote192.168.1.19 v3 auth md5 greenpeace priv des56 einstien 4-100Console(config)#exitConsole#show snmp user 4-101No user existSNMP remote userEngineId: 80000000030004e2b316c54321User Name: markAuthentication Protocol: nonePrivacy Protocol: noneStorage Type: nonvolatileRow Status: activeConsole#3-60