Management Guide - Kamery IP

3Configuring the SwitchDisplaying Interfaces Attached to a Multicast RouterMulticast routers that are attached to ports on the switch use information obtainedfrom IGMP, along with a multicast routing protocol such as DVMRP or PIM, tosupport IP multicasting across the Internet. These routers may be dynamicallydiscovered by the switch or statically assigned to an interface on the switch.You can use the Multicast Router Port Information page to display the ports on thisswitch attached to a neighboring multicast router/switch for each VLAN ID.Command Attributes• VLAN ID – ID of configured VLAN (1-4094).• Multicast Router List – Multicast routers dynamically discovered by this switch orthose that are statically assigned to an interface on this switch.Web – Click IGMP Snooping, Multicast Router Port Information. Select the requiredVLAN ID from the scroll-down list to display the associated multicast routers.Figure 3-168 Displaying Multicast Router Port InformationCLI – This example shows that Port 11 has been statically configured as a portattached to a multicast router.Console#show ip igmp snooping mrouter vlan 14-394VLAN M'cast Router Port Type---- ------------------ -------1 Eth 1/11 StaticConsole#3-292