Management Guide - Kamery IP

Multicast Filtering Commands4Table 4-94 IGMP Snooping Commands (Continued)Command Function Mode Pageshow ip igmp snooping Shows the IGMP snooping and query configuration PE 4-387show mac-address-tablemulticastShows the IGMP snooping MAC multicast list PE 4-389ip igmp snoopingThis command enables IGMP snooping on this switch. Use the no form to disable it.Syntax[no] ip igmp snoopingDefault SettingEnabledCommand ModeGlobal ConfigurationExampleThe following example enables IGMP snooping.Console(config)#ip igmp snoopingConsole(config)#ip igmp snooping vlan staticThis command adds a port to a multicast group. Use the no form to remove the port.Syntax[no] ip igmp snooping vlan vlan-id static ip-address interface• vlan-id - VLAN ID (Range: 1-4094)• ip-address - IP address for multicast group• interface• ethernet unit/port- unit - Stack unit. (Range: 1)- port - Port number. (Range: 1-28/52)• port-channel channel-id (Range: 1-8)Default SettingNoneCommand ModeGlobal ConfigurationCommand Usage• Static multicast entries are never aged out.4-385