Management Guide - Kamery IP

Port Configuration3FieldAdmin State,Oper StateTable 3-9 LACP Internal Configuration Information (Continued)DescriptionAdministrative or operational values of the actor’s state parameters:• Expired – The actor’s receive machine is in the expired state;• Defaulted – The actor’s receive machine is using defaulted operational partnerinformation, administratively configured for the partner.• Distributing – If false, distribution of outgoing frames on this link is disabled; i.e.,distribution is currently disabled and is not expected to be enabled in the absenceof administrative changes or changes in received protocol information.• Collecting – Collection of incoming frames on this link is enabled; i.e., collectionis currently enabled and is not expected to be disabled in the absence ofadministrative changes or changes in received protocol information.• Synchronization – The System considers this link to be IN_SYNC; i.e., it hasbeen allocated to the correct Link Aggregation Group, the group has beenassociated with a compatible Aggregator, and the identity of the Link AggregationGroup is consistent with the System ID and operational Key informationtransmitted.• Aggregation – The system considers this link to be aggregatable; i.e., a potentialcandidate for aggregation.• Long timeout – Periodic transmission of LACPDUs uses a slow transmission rate.• LACP-Activity – Activity control value with regard to this link.(0: Passive; 1: Active)Web – Click Port, LACP, Port Internal Information. Select a port channel to displaythe corresponding information.Figure 3-100 LACP - Port Internal Information3-169