Management Guide - Kamery IP

4Command Line InterfaceCommand ModeInterface Configuration (Ethernet, Port Channel)Command UsageThe port description is taken from the ifDescr object in RFC 2863, whichincludes information about the manufacturer, the product name, and theversion of the interface hardware/software.ExampleConsole(config)#interface ethernet 1/1Console(config-if)#lldp basic-tlv port-descriptionConsole(config-if)#lldp basic-tlv system-capabilitiesThis command configures an LLDP-enabled port to advertise its system capabilities.Use the no form to disable this feature.Syntax[no] lldp basic-tlv system-capabilitiesDefault SettingEnabledCommand ModeInterface Configuration (Ethernet, Port Channel)Command UsageThe system capabilities identifies the primary function(s) of the system andwhether or not these primary functions are enabled. The informationadvertised by this TLV is described in IEEE 802.1AB.ExampleConsole(config)#interface ethernet 1/1Console(config-if)#lldp basic-tlv system-capabilitiesConsole(config-if)#lldp basic-tlv system-descriptionThis command configures an LLDP-enabled port to advertise the systemdescription. Use the no form to disable this feature.Syntax[no] lldp basic-tlv system-descriptionDefault SettingEnabled4-354