Management Guide - Kamery IP

Automatic Traffic Control Commands4snmp-server enable port-traps atc multicast-alarm-clearThis command sends a trap when multicast traffic falls beneath the lower thresholdafter a storm control response has been triggered. Use the no form to disable thistrap.Syntax[no] snmp-server enable port-traps atc multicast-alarm-clearDefault SettingDisabledCommand ModeInterface Configuration (Ethernet)ExampleConsole(config)#interface ethernet 1/1Console(config-if)#snmp-server enable port-traps atc multicast-alarm-clearConsole(config-if)#Related Commandsauto-traffic-control action (4-243)auto-traffic-control alarm-clear-threshold (4-242)snmp-server enable port-traps atc broadcast-control-applyThis command sends a trap when broadcast traffic exceeds the upper threshold forautomatic storm control and the apply timer expires. Use the no form to disable thistrap.Syntax[no] snmp-server enable port-traps atc broadcast-control-applyDefault SettingDisabledCommand ModeInterface Configuration (Ethernet)ExampleConsole(config)#interface ethernet 1/1Console(config-if)#snmp-server enable port-traps atcbroadcast-control-applyConsole(config-if)#Related Commandsauto-traffic-control alarm-fire-threshold (4-241)auto-traffic-control apply-timer (4-239)4-247