Management Guide - Kamery IP

UPnP3UPnP ConfigurationUse the UPnP Configuration page to enable or disable UPnP, and to setadvertisement and time out values.Command Attributes• UPNP Status – Enables/disables UPnP on the device. (Default: Disabled)• Advertising Duration – This sets the duration of which a device will advertise itsstatus to the control point. (Range: 60-86400 seconds; Default: 100 seconds)• TTL Value – Sets the time-to-live (TTL) value for UPnP messages transmitted bythe device. (Range: 1-255; Default: 4)Web – Click UPNP, Configuration and enter the desired variables.Figure 3-191 UPnP ConfigurationCLI – This example enables UPnP, sets the device advertise duration to 200seconds, the device TTL to 6, and displays information about basic UPnPconfiguration.Console(config)#upnp device 4-85Console(config)#upnp device advertise duration 200 4-86Console(config)#upnp device ttl 6 4-85Console(config)#endConsole#show upnp 4-86UPnP global settings:Status:EnabledAdvertise duration: 200TTL: 6Console#3-323