Management Guide - Kamery IP

3Configuring the SwitchCommand Attributes• Automatic Opcode Upgrade – Enables the switch to search for an upgradedoperation code file during the switch bootup process.- Enabled check box – Defines the state of this feature. (Default: Disabled)• Automatic Upgrade Location URL – Defines where the switch should search forthe operation code upgrade file. The last character of this URL must be a forwardslash (“/”). The ES3528MF-PoE.bix filename must not be included since it isautomatically appended by the switch. (Options: ftp, tftp)The following syntax must be observed:tftp://host[/filedir]/tftp:// – Defines TFTP protocol for the server connection.host – Defines the IP address of the TFTP server. Valid IP addressesconsist of four numbers, 0 to 255, separated by periods. DNS hostnamesare not recognized.filedir – Defines the directory, relative to the TFTP server root, where theupgrade file can be found. Nested directory structures are accepted. Thedirectory name must be separated from the host, and in nested directorystructures, from the parent directory, with a prepended forward slash “/”./ – The forward slash must be the last character of the URL.ftp://[username[:password@]]host[/filedir]/ftp:// – Defines FTP protocol for the server connection.username – Defines the user name for the FTP connection. If the username is omitted, then “anonymous” is the assumed user name for theconnection.password – Defines the password for the FTP connection. To differentiatethe password from the user name and host portions of the URL, a colon(:) must precede the password, and an “at” symbol (@), must follow thepassword. If the password is omitted, then “” (an empty string) is theassumed password for the connection.host – Defines the IP address of the FTP server. Valid IP addressesconsist of four numbers, 0 to 255, separated by periods. DNS hostnamesare not recognized.filedir – Defines the directory, relative to the FTP server root, where theupgrade file can be found. Nested directory structures are accepted. Thedirectory name must be separated from the host, and in nested directorystructures, from the parent directory, with a prepended forward slash “/”./ – The forward slash must be the last character of the URL.Examples• The following examples demonstrate the URL syntax for a TFTP server at IPaddress 192.168.0.1 with the operation code image stored in various locations:- tftp://192.168.0.1/The image file is in the TFTP root directory.- tftp://192.168.0.1/switch-opcode/The image file is in the “switch-opcode” directory, relative to the TFTP root.3-24