Management Guide - Kamery IP

VLAN Commands4pvlan up-to-upThis command specifies whether or not traffic can be forwarded between uplinkports assigned to different client sessions. Use the no form to restore the default.Syntax[no] pvlan up-to-up {blocking | forwarding}• blocking – Blocks traffic between uplink ports assigned to differentsessions.• forwarding – Forwards traffic between uplink ports assigned to differentsessions.Default SettingBlockingCommand ModeGlobal ConfigurationExampleThis example enables forwarding of traffic between uplink ports assigned to differentclient sessions.Console(config)#pvlan up-to-upConsole(config)#show pvlanThis command displays the traffic segmentation configuration settings.Syntaxshow pvlan [session session-id]session-id – Traffic segmentation session. (Range: 1-15)Command ModePrivileged ExecExampleConsole#show pvlanPrivate VLAN Status : EnabledUplink-to-Uplink Mode :BlockingSession Uplink Ports Downlink Ports--------- ------------------------------ -----------------------------1 Ethernet 1/28 Ethernet 1/9Ethernet 1/10Ethernet 1/11Console#4-325