Management Guide - Kamery IP

3Configuring the SwitchTable 3-2 Main Menu (Continued)Menu Description PageReceiver Group IPInformationDisplays ports assigned to MVR receiver groups 3-310Receiver Group MemberConfigurationStatically assigns MVR receiver groups to selected ports 3-311DNS Domain Name Service 3-312General Configuration Enables DNS; configures domain name and domain list; and 3-312specifies IP address of name servers for dynamic lookupStatic Host Table Configures static entries for domain name to address mapping 3-314Cache Displays cache entries discovered by designated name servers 3-316DHCP Snooping 3-143ConfigurationEnables DHCP Snooping and DHCP Snooping MAC-Address 3-144VerificationVLAN Configuration Enables DHCP Snooping for a VLAN 3-145Information OptionEnables DHCP Snooping Information Option 3-146ConfigurationPort Configuration Selects the DHCP Snooping Information Option policy 3-147Binding Information Displays the DHCP Snooping binding information 3-149IP Source Guard 3-150Port Configuration Enables IP source guard and selects filter type per port 3-150Static Configuration Adds a static addresses to the source-guard binding table 3-152Dynamic Information Displays the source-guard binding table for a selected interface 3-154UPNP Universal Plug and Play 3-322Configuration Enables UPNP and defines timeout values 3-323Cluster 3-317Configuration Globally enables clustering for the switch 3-317Member Configuration Adds switch Members to the cluster 3-319Member Information Displays cluster Member switch information 3-320Candidate Information Displays network Candidate switch information 3-3213-12