Management Guide - Kamery IP

3Configuring the SwitchConsole#show lacp sysid 4-258Port Channel System Priority System MAC Address-------------------------------------------------------------------------1 3 00-12-CF-31-31-312 32768 00-12-CF-31-31-313 32768 00-12-CF-31-31-314 32768 00-12-CF-31-31-31Console#show lacp 1 internal 4-258Port Channel: 1-------------------------------------------------------------------------Oper Key: 120Admin Key: 0Eth 1/1-------------------------------------------------------------------------LACPDUs Internal: 30 secLACP System Priority: 3LACP Port Priority: 128Admin Key: 120Oper Key: 120Admin State : defaulted, aggregation, long timeout, LACP-activity.Oper State:Configuring Parameters for LACP Groupsdistributing, collecting, synchronization,aggregation, long timeout, LACP-activityUse the Aggregator page to configure system parameters which apply to specificLACP groups.Command Attributes• Admin Key – LACP administration key is used to identify a specific linkaggregation group (LAG) during local LACP setup on the switch. (Range: 0-65535)Ports are only allowed to join the same LAG if (1) the LACP port system prioritymatches, (2) the LACP port admin key matches, and (3) the LACP port channeladmin key matches (if configured).If the port channel admin key is not set when a channel group is formed (that is, ithas the null value of 0), this key is set to the same value as the port admin key usedby the interfaces that joined the group. Note that when the LAG is no longer used,the port channel admin key is reset to 0.3-166