Management Guide - Kamery IP

4Command Line InterfaceSystem Management CommandsThese commands are used to control system logs, passwords, user names, browserconfiguration options, and display or configure a variety of other system information.Table 4-6 System Management CommandsCommand Group Function PageDevice Designation Configures information that uniquely identifies this switch 4-18Banner Information Configures administrative contact, device identification and location 4-19System Status Displays system configuration, active managers, and version information 4-29Frame Size Enables support for jumbo frames 4-35File Management Manages code image or switch configuration files 4-36LineSets communication parameters for the serial port, including baud rate and 4-44console time-outEvent Logging Controls logging of error messages 4-57SMTP Alerts Configures SMTP email alerts 4-63Time (System Clock) Sets the system clock automatically via NTP/SNTP server or manually 4-67Switch Clustering Configures management of multiple devices via a single IP address 4-80UPnP Sets Universal Plug-and-Play parameters used to advertise the switch 4-84Device Designation CommandsTable 4-7 Device Designation CommandsCommand Function Mode Pageprompt Customizes the prompt used in PE and NE mode GC 4-16hostname Specifies the host name for the switch GC 4-18snmp-server contact Sets the system contact string GC 4-90snmp-server location Sets the system location string GC 4-91hostnameThis command specifies or modifies the host name for this device. Use the no formto restore the default host name.Syntaxhostname nameno hostnamename - The name of this host. (Maximum length: 255 characters)Default SettingNoneCommand ModeGlobal Configuration4-18