Management Guide - Kamery IP

3Configuring the SwitchWeb – Click IGMP Snooping, IGMP Filter/Throttling Port Configuration or IGMPFilter/Throttling Trunk Configuration. Select a profile to assign to an interface, thenset the throttling number and action. Click Apply.Figure 3-174 IGMP Filter and Throttling Port ConfigurationCLI – This example assigns IGMP profile number 19 to port 1, and then sets thethrottling number and action. The current IGMP filtering and throttling settings for theinterface are then displayed.Console(config)#interface ethernet 1/1 4-222Console(config-if)#ip igmp filter 19 4-397Console(config-if)#ip igmp max-groups 64 4-398Console(config-if)#ip igmp max-groups action deny 4-399Console(config-if)#endConsole#show ip igmp filter interface ethernet 1/1 4-399Information of Eth 1/1IGMP Profile 19permitrange 239.1.2.3 239.1.2.3range 239.2.3.1 239.2.3.200Console#show ip igmp throttle interface ethernet 1/1 4-400Information of Eth 1/1status : TRUEaction : denymax multicast groups : 64current multicast groups: 0Console#3-300