Management Guide - Kamery IP

4Command Line InterfaceConfiguring VLAN Interfacesinterface vlanThis command enters interface configuration mode for VLANs, which is used toconfigure VLAN parameters for a physical interface.Syntaxinterface vlan vlan-idvlan-id - ID of the configured VLAN. (Range: 1-4094, no leading zeroes)Default SettingNoneCommand ModeGlobal ConfigurationTable 4-76Configuring VLAN InterfacesCommand Function Mode Pageinterface vlan Enters interface configuration mode for a specified VLAN GC 4-310switchport mode Configures VLAN membership mode for an interface IC 4-311switchportConfigures frame types to be accepted by an interface IC 4-312acceptable-frame-typesswitchport ingress-filtering Enables ingress filtering on an interface IC 4-312switchport native vlan Configures the PVID (native VLAN) of an interface IC 4-313switchport allowed vlan Configures the VLANs associated with an interface IC 4-314switchport gvrp Enables GVRP for an interface IC 4-305switchport forbidden vlan Configures forbidden VLANs for an interface IC 4-315switchport priority default Sets a port priority for incoming untagged frames IC 4-368vlan-trunking Allows unknown VLANs to cross the switch IC 4-315ExampleThe following example shows how to set the interface configuration mode toVLAN 1, and then assign an IP address to the VLAN:Console(config)#interface vlan 1Console(config-if)#ip address 192.168.1.254 255.255.255.0Console(config-if)#Related Commandsshutdown (4-228)4-310