Management Guide - Kamery IP

Main Menu3Table 3-2 Main Menu (Continued)Menu Description PageTime Zone Sets the local time zone for the system clock 3-46Summer Time Configures summer time settings 3-47SNMP Simple Network Management Protocol 3-49Configuration Configures community strings and related trap functions 3-51Agent Status Enables or disables SNMP Agent Status 3-51SNMPv3 3-55Engine ID Sets the SNMP v3 engine ID on this switch 3-55Remote Engine ID Sets the SNMP v3 engine ID for a remote device 3-56Users Configures SNMP v3 users on this switch 3-57Remote Users Configures SNMP v3 users from a remote device 3-59Groups Configures SNMP v3 groups 3-61Views Configures SNMP v3 views 3-64sFlow Samples traffic flows, and forwards data to designated collector 3-65ConfigurationGlobally enables flow sampling, enables sampling per port, and 3-66sets the sampling rate per portPort ConfigurationSets destination parameters, payload parameters, and sampling 3-68intervalSecurity 3-70User Accounts Assigns a new password for the current user 3-70Authentication Settings Configures authentication sequence, RADIUS and TACACS 3-72Encryption Key Configures RADIUS and TACACS encryption key settings 3-75AAA Authentication, Authorization and Accounting 3-76RADIUS Group Settings Defines the configured RADIUS servers to use for accounting 3-77TACACS+ Group Settings Defines the configured TACACS+ servers to use for accounting 3-78AccountingSettingsConfigures accounting of requested services for billing or3-78security purposesPeriodic UpdateSets the interval at which accounting updates are sent to3-80RADIUS AAA servers802.1X Port Settings Applies the specified accounting method to an interface 3-81Command Privileges Specifies a method name to apply to commands entered at 3-82specific CLI privilege levelsExec Settings Specifies console or Telnet authentication method 3-83Summary Displays accounting information and statistics 3-833-5