Management Guide - Kamery IP

4Command Line InterfaceExampleTo enter console line mode, enter the following command:Console(config)#line consoleConsole(config-line)#Related Commandsshow line (4-56)show users (4-33)loginThis command enables password checking at login. Use the no form to disablepassword checking and allow connections without a password.Syntaxlogin [local]no loginlocal - Selects local password checking. Authentication is based on theuser name specified with the username command.Default Settinglogin localCommand ModeLine ConfigurationCommand Usage• There are three authentication modes provided by the switch itself at login:- login selects authentication by a single global password as specified by thepassword line configuration command. When using this method, themanagement interface starts in Normal Exec (NE) mode.- login local selects authentication via the user name and passwordspecified by the username command (i.e., default setting). When using thismethod, the management interface starts in Normal Exec (NE) or PrivilegedExec (PE) mode, depending on the user’s privilege level (0 - NE, 8/15 - PE).- no login selects no authentication. When using this method, themanagement interface starts in Normal Exec (NE) mode.• This command controls login authentication via the switch itself. To configureuser names and passwords for remote authentication servers, you must usethe RADIUS or TACACS software installed on those servers.ExampleConsole(config-line)#login localConsole(config-line)#4-46