12.07.2015 Views

Management Guide - Kamery IP

Management Guide - Kamery IP

Management Guide - Kamery IP

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Link Layer Discovery Protocol3configure the system name, see “Displaying System Information” on page 3-13.- System Capabilities – The system capabilities identifies the primary function(s)of the system and whether or not these primary functions are enabled. Theinformation advertised by this TLV is described in IEEE 802.1AB.• MED TLV Type – Configures the information included in the MED TLV field ofadvertised messages.- Port Capabilities – This option advertises LLDP-MED TLV capabilities, allowingMedia Endpoint and Connectivity Devices to efficiently discover whichLLDP-MED related TLVs are supported on the switch.- Network Policy – This option advertises network policy configurationinformation, aiding in the discovery and diagnosis of VLAN configurationmismatches on a port. Improper network policy configurations frequently resultin voice quality degradation or complete service disruption.- Location – This option advertises location identification details.- Extended Power – This option advertises extended Power-over-Ethernetcapability details, such as power availability from the switch, and power state ofthe switch, including whether the switch is operating from primary or backuppower (the Endpoint Device could use this information to decide to enter powerconservation mode). Note that this device does not support PoE capabilities.- Inventory – This option advertises device details useful for inventorymanagement, such as manufacturer, model, software version and otherpertinent information.• MED Notification – Enables the transmission of SNMP trap notifications aboutLLDP-MED changes. (Default: Enabled)• Trunk – The trunk identifier. (Port Information only)Web – Click LLDP, Port/Trunk Configuration. Set the LLDP transmit/receive mode,specify whether or not to send SNMP trap messages, select the information toadvertise in LLDP messages, select the information to advertise in MED-TLVmessages and specify whether or not to send MED notifications. Then click Apply.Figure 3-148 LLDP Port Configuration3-255

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!