Management Guide - Kamery IP

Spanning Tree Commands4Command ModeGlobal ConfigurationCommand UsageThis command limits the maximum transmission rate for BPDUs.ExampleConsole(config)#spanning-tree transmission-limit 4Console(config)#spanning-tree mst-configurationThis command changes to Multiple Spanning Tree (MST) configuration mode.Default Setting• No VLANs are mapped to any MST instance.• The region name is set the switch’s MAC address.Command ModeGlobal ConfigurationExampleConsole(config)#spanning-tree mst configurationConsole(config-mstp)#Related Commandsmst vlan (4-285)mst priority (4-286)name (4-287)revision (4-287)max-hops (4-288)mst vlanThis command adds VLANs to a spanning tree instance. Use the no form to removethe specified VLANs. Using the no form without any VLAN parameters to remove allVLANs.Syntax[no] mst instance-id vlan vlan-range• instance-id - Instance identifier of the spanning tree. (Range: 0-4094)• vlan-range - Range of VLANs. (Range: 1-4094)Default SettingnoneCommand ModeMST Configuration4-285