Management Guide - Kamery IP

4Command Line InterfaceExampleThe following shows how to configure broadcast storm control at 500 kilobits persecond:Console(config)#interface ethernet 1/5Console(config-if)#switchport broadcast packet-rate 500Console(config-if)#clear countersThis command clears statistics on an interface.Syntaxclear counters interfaceinterface• ethernet unit/port- unit - Stack unit. (Range: 1)- port - Port number. (Range: 1-28/52)• port-channel channel-id (Range: 1-8)Default SettingNoneCommand ModePrivileged ExecCommand UsageStatistics are only initialized for a power reset. This command sets the basevalue for displayed statistics to zero for the current management session.However, if you log out and back into the management interface, the statisticsdisplayed will show the absolute value accumulated since the last power reset.ExampleThe following example clears statistics on port 5.Console#clear counters ethernet 1/5Console#show interfaces briefThis command displays a summary of key information, including operational status,native VLAN ID, default priority, speed/duplex mode, and port type for all ports.Command ModePrivileged Exec4-230