Management Guide - Kamery IP

4Command Line Interfaceshow gvrp configurationThis command shows if GVRP is enabled.Syntaxshow gvrp configuration [interface]interface• ethernet unit/port- unit - Stack unit. (Range: 1)- port - Port number. (Range: 1-28/52)• port-channel channel-id (Range: 1-8)Default SettingShows both global and interface-specific configuration.Command ModeNormal Exec, Privileged ExecExampleConsole#show gvrp configuration ethernet 1/6Eth 1/ 6:GVRP configuration: EnabledConsole#garp timerThis command sets the values for the join, leave and leaveall timers. Use the noform to restore the timers’ default values.Syntaxgarp timer {join | leave | leaveall} timer-valueno garp timer {join | leave | leaveall}• {join | leave | leaveall} - Which timer to set.• timer-value - Value of timer.Ranges:join: 20-1000 centisecondsleave: 60-3000 centisecondsleaveall: 500-18000 centisecondsDefault Setting• join: 20 centiseconds• leave: 60 centiseconds• leaveall: 1000 centisecondsCommand ModeInterface Configuration (Ethernet, Port Channel)4-306