Management Guide - Kamery IP

System Management Commands4Command ModeGlobal ConfigurationCommand Usage• In some countries or regions, clocks are adjusted through the summer monthsso that afternoons have more daylight and mornings have less. This is knownas Summer Time, or Daylight Savings Time (DST). Typically, clocks areadjusted forward one hour at the start of spring and then adjusted backwardin autumn.• This command sets the summer-time time zone relative to the currentlyconfigured time zone. To display a time corresponding to your local time whensummer time is in effect, you must indicate the number of minutes yoursummer-time time zone deviates from your regular time zone.ExampleConsole(config)#clock summer-time MESZ recurring 1 friday june 23 59 3saturday september 2 55 60Console(config)#Related Commandsshow sntp (4-70)calendar setThis command sets the system clock. It may be used if there is no time server onyour network, or if you have not configured the switch to receive signals from a timeserver.Syntaxcalendar set hour min sec {day month year | month day year}• hour - Hour in 24-hour format. (Range: 0-23)• min - Minute. (Range: 0-59)• sec - Second. (Range: 0-59)• day - Day of month. (Range: 1-31)• month - january | february | march | april | may | june | july | august |september | october | november | december• year - Year (4-digit). (Range: 2001-2100)Default SettingNoneCommand ModePrivileged Exec4-79