Management Guide - Kamery IP

Class of Service Configuration3Web – Click Priority, IP DSCP Priority. Select an entry from the DSCP table, enter avalue in the Class of Service Value field, then click Apply.Figure 3-159 Mapping IP DSCP Priority ValuesCLI – The following example globally enables DSCP Priority service on the switch,maps DSCP value 0 to CoS value 1 (on port 1), and then displays the DSCP Prioritysettings.Console(config)#map ip dscp 4-372Console(config)#interface ethernet 1/1 4-222Console(config-if)#map ip dscp 1 cos 0 4-372Console(config-if)#endConsole#show map ip dscp ethernet 1/1 4-374DSCP mapping status: disabledPort DSCP COS--------- ---- ---Eth 1/ 1 0 0Eth 1/ 1 1 0Eth 1/ 1 2 0Eth 1/ 1 3 0.Eth 1/ 1 61 0Eth 1/ 1 62 0Eth 1/ 1 63 0Console#* Mapping specific values for IP DSCP is implemented as an interface configurationcommand, but any changes will apply to the all interfaces on the switch.3-273