Management Guide - Kamery IP

3Configuring the SwitchCLI – This example configures VoIP traffic settings for port 2 and displays thecurrent Voice VLAN status.Console(config)#interface ethernet 1/2Console(config-if)#switchport voice vlan auto 4-341Console(config-if)#switchport voice vlan security 4-342Console(config-if)#switchport voice vlan rule oui 4-341Console(config-if)#switchport voice vlan priority 5 4-343Console(config-if)#exitConsole#show voice vlan status 4-343Global Voice VLAN StatusVoice VLAN Status : EnabledVoice VLAN ID : 1234Voice VLAN aging time : 1440 minutesVoice VLAN Port SummaryPort Mode Security Rule Priority-------- -------- -------- --------- --------Eth 1/ 1 Auto Enabled OUI 6Eth 1/ 2 Auto Enabled OUI 5Eth 1/ 3 Manual Enabled OUI 5Eth 1/ 4 Auto Enabled OUI 6Eth 1/ 5 Disabled Disabled OUI 6Eth 1/ 6 Disabled Disabled OUI 6Eth 1/ 7 Disabled Disabled OUI 6Eth 1/ 8 Disabled Disabled OUI 6Eth 1/ 9 Disabled Disabled OUI 6Eth 1/10 Disabled Disabled OUI 6.Configuring Telephony OUIVoIP devices attached to the switch can be identified by the manufacturer’sOrganizational Unique Identifier (OUI) in the source MAC address of receivedpackets. OUI numbers are assigned to manufacturers and form the first three octetsof device MAC addresses. The MAC OUI numbers for VoIP equipment can beconfigured on the switch so that traffic from these devices is recognized as VoIP.Command Attributes• Telephony OUI – Specifies a MAC address range to add to the list. Enter the MACaddress in format 01-23-45-67-89-AB.• Mask – Identifies a range of MAC addresses. Selecting a mask ofFF-FF-FF-00-00-00 identifies all devices with the same OUI (the first three octets).Other masks restrict the MAC address range. Selecting FF-FF-FF-FF-FF-FFspecifies a single MAC address. (Default: FF-FF-FF-00-00-00)• Description – User-defined text that identifies the VoIP devices.3-284