Management Guide - Kamery IP

3Configuring the SwitchCLI – The following example displays the LACP configuration settings andoperational state for the local side of port channel 1.Console#show lacp 1 internal 4-258Port channel : 1-------------------------------------------------------------------------Oper Key : 120Admin Key : 0Eth 1/1-------------------------------------------------------------------------LACPDUs Internal: 30 secLACP System Priority: 3LACP Port Priority: 128Admin Key: 120Oper Key: 120Admin State : defaulted, aggregation, long timeout, LACP-activity.Oper State:distributing, collecting, synchronization,aggregation, long timeout, LACP-activityDisplaying LACP Settings and Status for the Remote SideYou can display configuration settings and the operational state for the remote sideof an link aggregation.Table 3-10 LACP Neighbor Configuration InformationFieldDescriptionPartner Admin System ID LAG partner’s system ID assigned by the user.Partner Oper System ID LAG partner’s system ID assigned by the LACP protocol.Partner Admin Port Number Current administrative value of the port number for the protocol Partner.Partner Oper Port Number Operational port number assigned to this aggregation port by the port’sprotocol partner.Port Admin PriorityCurrent administrative value of the port priority for the protocol partner.Port Oper PriorityPriority value assigned to this aggregation port by the partner.Admin KeyCurrent administrative value of the Key for the protocol partner.Oper KeyCurrent operational value of the Key for the protocol partner.Admin StateAdministrative values of the partner’s state parameters. (See preceding table.)Oper StateOperational values of the partner’s state parameters. (See preceding table.)3-170