Management Guide - Kamery IP

4Command Line Interfacedot1x defaultThis command sets all configurable dot1x global and port settings to their defaultvalues.Command ModeGlobal ConfigurationExampleConsole(config)#dot1x defaultConsole(config)#dot1x max-reqThis command sets the maximum number of times the switch port will retransmit anEAP request/identity packet to the client before it times out the authenticationsession. Use the no form to restore the default.Syntaxdot1x max-req countno dot1x max-reqcount – The maximum number of requests (Range: 1-10)Default2Command ModeInterface ConfigurationExampleConsole(config)#interface eth 1/2Console(config-if)#dot1x max-req 2Console(config-if)#dot1x port-controlThis command sets the dot1x mode on a port interface. Use the no form to restorethe default.Syntaxdot1x port-control {auto | force-authorized | force-unauthorized}no dot1x port-control• auto – Requires a dot1x-aware connected client to be authorized by theRADIUS server. Clients that are not dot1x-aware will be denied access.• force-authorized – Configures the port to grant access to all clients, eitherdot1x-aware or otherwise.• force-unauthorized – Configures the port to deny access to all clients,either dot1x-aware or otherwise.4-146