Avaya IR Install and Troubleshooting Guide - Avaya Support

MigrationThe speech conversion tool generates a report on converted files, and reports any errors.To convert the speech files:1. Transfer the do_speech utility, provided with the migration scanning tool, to the targetAvaya IR system.The do_speech utility is located in the same directory where the migration tools wereinstalled on the source system.2. Run the command: do_speech.The do_speech utility prompts for a directory where the speech files are located.3. Enter the directory where the speech files are located.When it is done running, the utility creates a log file in the current directory (for example,speechlog.06-19-02:133205).The log file contains data in the following format:TYPE: pcm64 File Name: /voice1/vfs/talkfiles/619/41 Bytes: 31304TYPE: pcm64 File Name: /voice1/vfs/talkfiles/619/42 Bytes: 40512TYPE: pcm64 File Name: /voice1/vfs/talkfiles/619/43 Bytes: 29760TYPE: pcm64 File Name: /voice1/vfs/talkfiles/619/44 Bytes: 34368TYPE: pcm64 File Name: /voice1/vfs/talkfiles/619/45 Bytes: 26184TYPE: pcm64 File Name: /voice1/vfs/talkfiles/619/46 Bytes: 25672TYPE: pcm64 File Name: /voice1/vfs/talkfiles/619/47 Bytes: 28232TYPE: pcm64 File Name: /voice1/vfs/talkfiles/619/48 Bytes: 88168TYPE: pcm64 File Name: /voice1/vfs/talkfiles/619/49 Bytes: 13368Total Bytes Converted = 4192200Every converted file is reported and logged. The utility overwrites the legacy ConversantADPCM files with Avaya IR G7.11 format.Note:Non-speech files are generally ignored, but it is good practice to make surethat only custom legacy speech files are in the directory.Migrating applicationsYou can migrate Script Builder or IVR Designer applications as follows:Script BuilderScript Builder applications from CONVERSANT systems can be migrated to Avaya IRsystems.To migrate Script Builder applications to the Avaya IR system:Issue 3 March 2003 57