Thixoforming : Semi-solid Metal Processing

102j 3 Material Aspects of Steel Thixoforming
Eidgen€ossischen technischen Hochschule
Z€urich, ETH-Dissertation Nr. 14154.
16 Ichikawa, K., Murakami, T., Miyamoto, S.,
Nakayama, Y. and Tokita, M. (2002)
Production and properties of nanostuctured
bulk pure irons by spark plasma
sintering process. Proceedings of the 7th
International Conference on Semi-solid
Processing of Alloys and Composites
Tsukuba, pp. 379–384.
17 Uggowitzer, P., Gullo, G. and Wahlen, A.
(2000) Metallkundliche Aspekte bei der
semi-solid Formgebung von Leichtmetallen,
in Vom Werkstoff zum Bauteilsystem
(eds H. Kaufmann and P.J. Uggowizer),
LKR-Verlag Ranshofen, pp. 95–107.
18 Balitchev, E., Hallstedt, B. and Neusch€utz,
D. (2005) Thermodynamic criteria for the
selection of alloys suitable for semi-solid
processing. Steel Research, 76 (2/3), 92–98.
19 P€uttgen, W. and Bleck, W. (2004) DTAmeasurements
to determine the
thixoformability of steels. Steel Research, 75
(8/9), 531–536.
20 Kaufmann, H., Fragner, W., Galovsky, U.
and Uggowitzer, P. (2005) Fluctuations of
alloy composition and their influence on
sponge effect and fluidity of A356-NRC.
Proceedings of the 2nd International Light
Metals Technology Conference.
21 Bleck, W. (ed.) (2004) Werkstoffkunde Stahl
f€ur Studium und Praxis, Verlag Mainz,
Aachen.
22 Zhu, M., Kim, J. and Hong, C. (2001)
Modelling of globular and dendritic
structure evolution in solidification of an
Al–7 mass% Si alloy. ISIJ International, 41,
992–998.
23 Kurz, W., Giovanola, B. and Trivedi, R.
(1986) Theory of microstructural
development during rapid solidification.
Acta Metallurgica, 34 (5), 823–830.
24 Rappaz, M. and Gandin, Ch. (1993)
Probabilistic modelling of microstructure
formation in solidification processes. Acta
Metallurgia et Materialia, 41 (2), 345–360.
25 Uggowitzer, P. and Kaufmann, H. (2004)
Evolution of globular microstructure in
new rheocasting and super rheocasting
semi-solid slurries. Steel Research, 75 (8/9),
525–530.
26 Kraft, T. and Exner, H. (1996) Numerische
Simulation der Erstarrung, Teil 2:
Mikroseigerungen in tern€aren und
h€oherkomponentigen Legierungen.
Zeitschrift f€ur Metallkunde, 87 (8), 652–660.
27 Kraft, T. and Exner, H. (1997) Numerische
Simulation der Erstarrung, Teil 3:
Vorhersage der Gef€ugestruktur. Zeitschrift
f€ur Metallkunde, 88 (4), 278–290.
28 Kraft, T. and Exner, H. (1997) Numerische
Simulation der Erstarrung, Teil 4:
Unterk€uhlungseffekte. Zeitschrift f€ur
Metallkunde, 88 (6), 455–468.
29 Wang, H., Davidson, C. and StJohn, D.
(2004) Semisolid microstructural
evolution of AlSiMg alloy during partial
remelting. Materials Science and
Engineering A, 368, 159–167.
30 Tzimas, E. and Zavaliangos, A. (2000)
Evaluation of volume fraction of solid in
alloys formed by semisolid processing.
Journal of Materials Science, 35, 5319–5329.
31 Suery, M. (2004) Microstructure of semisolid
alloys and properties. Proceedings of
the 8th International Conference on Semisolid
Processing of Alloys and Composites,
Limassol.
32 Ludwig, O., DiMichiel, M., Falus, P., Salvo,
L. and Suery, M. (2004) In-situ 3D
microstructural investigation by fast X-
Ray, microtomogaphy of Al–Cu alloys
during partial remelting. Proceedings of
the 8th International Conference on Semisolid
Processing of Alloys and Composites,
Limassol.
33 Loue, W. and Suery, M. (1995)
Microstructural evolution during partial
remelting of Al–Si7Mg alloys. Materials
Science and Engineering, A203, (1), 1–13.
34 Salvo, L., Cloetens, P., Maire, E., Zabler, S.,
Blanding, J., Buffiere, J., Ludwig, W.,
Boller, E., Bellet, D. and Josserond, C.
(2003) X-ray micro-tomography an
attractive characterization technique in
materials science. Nuclear Instruments and
Methods in Physics Research B, 200,
273–286.