Thixoforming : Semi-solid Metal Processing

366j 9 Rheocasting of Aluminium Alloys and Thixocasting of Steels
Beispiel verschiedener Aluminiumund
Magnesiumlegierungen, Shaker Verlag,
Aachen.
7 Kaufmann, H. et al. (2000) Proceedings of
the 6th International Conference on Semisolid
Processing of Alloys and Composites,
Turin, 27–29 September 2000,
pp. 457–463.
8 Giordano, P. (2003) Neue
Formgebungstechnologien f€ur
Leichtmetalle, Neuere Entwicklungen in
der Massivumformung, K. Siegert (ed.),
Fellbach, 2–4 June 2003, pp. 155–173.
9 Aguilar, J. et al. (2003) Proceedings of the
6th International Conference on Mg Alloys
and Their Applications, Wolfsburg.
10 Aguilar, J., et al. (2002) Processing of
semi-soild Mg alloys, P6, pp. 789–794.
11 Dworog, A. et al. (1999) Thixomoulding:
Neue M€arkte f€ur Spritzgiesser. KU
Kunststoffe, Jahrg, 89 (3), 34–38.
12 Garat, M. and Maenner, L. (2000) State of
the art of thixocasting. Proceedings of the
6th International Conference on Semisolid
Processing of Alloys and Composites,
Turin, 27–29 September 2000,
pp. 187–194.
13 Achten, M. (1995) Herstellung und
Verarbeitung thixotroper Aluminium-
Basiswerkstoffe, VDI-Verlag-D€usseldorf,
Reihe 5, Grund- und Werkstoffe Nr. 394.
14 SAG (Salzburger Aluminium AG)–
L€uchinger, H. and Wendinger, B. (2002)
Thixoforming – der rationelle Weg zur
Herstellung von Premium-Bauteilen aus
Aluminiumwerkstoffen. Giesserei-
Rundschau, 49, Nr 314, 34–37.
15 Mercer Management Consulting (2002)
Automobile Technology 2010,
Technological Changes to the Automobile
and Their Consequences for
Manufacturers, Component Suppliers and
Equipment Manufacturers.
16 Winterbottom, W.L. (2000) Semi-solid
forming applications. High volume
automotive products. Proceedings of the
6th International Conference on Semisolid
Processing of Alloys and Composites,
Turin, 27–29 September 2000, pp. 73–78.
17 Hirt, G. et al. (1995) Thixoforming – Ein
Verfahren mit Zukunft, Neuere
Entwicklungen in der Massivumformung,
Fellbach b. Stuttgart.
18 Engler, S., Hartmann, D. and Niedick, I.
(2000) Alloy development for automotive
applications. Proceedings of the 6th
International Conference on Semi-solid
Processing of Alloys and Composites,
Turin, 27–29 September 2000.
19 Gabathuler, J.P. (1998) Thixoforming: Ein
Neues Verfahren f€ur die Produktion von
Near-Net-Shapeformteilen,
Innenhochdruck- und Thixoformen von
Stahl und Al, Automobil-Arbeitskreise,
Tagung, Praxis-Forum, Automobil-
Arbeitskreise, Band 2, Technik þ
Kommunikation, Berlin, pp. 153, 155–168.
20 Neue Aluminium Giessverfahren,
Erg€anzung oder Revolution, in DVM-Tag
(1999) Berlin.
21 Wendinger, B. (2004) Thixoforming von
Aluminium, Semi-solid Technology
Seminar, RWTH Aachen, 17–18 February
2004.
22 Giordano, P. (2002) Thixo and Rheo
Casting: Comparison of a High Production
Volume Component, Proceedings of the
7th International Conference on the
Processing of Semi-solid Alloys and
Composites S2P congress, Tsukuba.
23 Garat, M. and Blais, S. (2001) Die
thixotrope Version der €ubereutektischen
Legierung A390. Giesserei, 88 (7), 187ff.
24 Hirt, G., (1998) Untersuchungen zum
Thixoforming als Alternative zur
Herstellung komplex geformter
Stahlschmiedeteile. Schmeide-Journal,
Industrieverband Massivumformung e.V.
25 Flemings, M.C. and Young, K.P. (1977)
Thixocasting of steel, 9th SDCE
International Die Casting Exposition
and Congress, Paper No. G-T77-092,
pp. 1–8.
26 Murty, Y.V., Backman, D.G. and
Mehrabian, R. (1977) Structure, heat
treatment and properties of rheocast
alloys, Rheocasting, Proceedings of the
MCIC Work Shop, pp. 95–107.