Thixoforming : Semi-solid Metal Processing

408j 10 Thixoforging and Rheoforging of Steel and Aluminium Alloys
components for electronic applications,
presented at International Conference on
Plastics in Portable and Wireless
Electronic, Mesa, AZ, 25 January 1999.
20 K€uthe, F., Sch€onbohm, A., Abel, D. and
Kopp, R. (2004) An automated thixoforging
plant for steel parts. Steel Research
International, 75 (8/9), 593–600.
21 Siegert, K. and Messmer, G. (2004)
Thixoforging of steel alloys – facility
requirements for industrial application.
Steel Research International, 75 (8/9),
601–606.
22 M€unstermann, S. and Telle, R. (2004)
Model tests and analyses of corrosion
resistance of ceramic tool dies for steel
thixoforming. Steel Research International,
75 (8/9), 581–587.
23 Kopp, R., Shimahara, H., Schneider, J.M.,
Kurapov, D., Telle, R., M€unstermann, S.,
Lugscheider, E., Bobzin, K. and Maes, M.
(2004) Characterization of steel
thixoforming tool materials by high
temperature compression tests. Steel
Research International, 75 (8/9), 569–576.
24 Kurapov, D. and Schneider, J.M. (2004)
Adhesion and thermal shock resistance of
Al2O3 thin films deposited by PACVD for
die protection in semi-solid processing of
steel. Steel Research International, 75 (8/9),
577–580.
25 Behrens, B.-A., Fischer, D., Haller, B. and
Rassili, A. (2004) Introduction of a full
automated process for the production of
automotive steel parts, Proceedings of the
8th International Conference on Semisolid
Processing of Alloys and Composites,
Limassol, Cyprus, 21–23 September 2004.
26 Fleck, Ch. and Sch€onbohm, A. (2004)
Flatness based trajectory generation for the
inductive heating of aluminium billets,
Proceedings of the 8th International
Conference on Semi-solid Processing of
Alloys and Composites, Limassol, Cyprus,
21–23 September 2004.
27 Siegert, H. (1961) Induktive Erw€armung.
Technische Rundschau. 13, 17–21.
28 Davis, J. and Simpson, P. (1979) Induction
Heating Handbook, McGraw-Hill, London.
29 Baehr, H.D. and Stephan, K. (2006)
W€arme- und Stoff€ubertragung, 5. Auflage,
Springer, Berlin.
30 Ritt, H.M. (2000) Regelung der induktiven
Erw€armung von Metallen in den
teilfl€ussigen Zustand. Dissertation RWTH
Aachen, VDI-Verlag.
31 Paulus, T. (2007) Integration
flachheitsbasierter Regelungs- und
Steuerungsverfahren in der
Prozessleittechnik. Dissertation RWTH
Aachen, VDI-Verlag.
32 Fliess, M., Levine, J., Martin, Ph. and
Rouchon, P. (1995) Flatness and defect of
nonlinear systems: Introductory theory
and examples. International Journal of
Control, 61, 1327–1361.
33 Martin, Ph., Murray, R.M., Rouchon, P.,
Bastin, G. (1997) Flat systems, in Plenary
Lectures and Mini-Courses, 4th European
Control Conference ECC 97, Gevers,
M.(ed.), Brussels, pp. 211–264.
34 Lynch, A.F. and Rudoph, J. (2000)
Flachheitsbasierte Randsteuerung
parabolischer Systeme mit verteilten
Parametern. at-Automatisierungstechnik.
48, 478–486.
35 Laroche, B., Martin, P. and Rouchon, P.
(2000) Motion planning for the heat
equation. International Journal of Robust
and Nonlinear Control, 10, 629–643.
36 Fleck, Ch. and Abel, D. (2003) Eine
Methode zur Bestimmung eines flachen
Ausgangs f€ur Systeme mit €ortlich
verteilten Parametern, GMA-Kongress,
Baden-Baden. VDI-Verlag, pp. 545–556.
37 Fleck, Ch., Paulus, Th. and Abel, D. (2003)
Eine flachheitsbasierte Randsteuerung f€ur
das Stefan-Problem, GMA-Kongress,
Baden-Baden. VDI-Verlag, pp. 311–319.
38 Fleck, Ch. and Sch€onbohm, A. (2004)
Flatness based trajectory generation for the
inductive heating of aluminium billets,
Proceedings of the 8th International
Conference on Semi-solid Processing of
Alloys and Composites, Limassol, Cyprus,
21–23 September 2004.
39 Schoenbohm, A., Gasper, R. and Abel, D.
(11–13 09 2006) Inductive reheating of