Thixoforming : Semi-solid Metal Processing

238j 7 A Physical and Micromechanical Model for Semi-solid Behaviour
slurries – I. The flow response. Acta
Metallurgica and Materialia, 42,
3595–3602.
18 Martin, C., Kumar, P. and Brown, S.B.
(1994) Constitutive modelling and
characterization of the flow behaviour of
semi-solid matal alloy slurries– II.
Structural evolution under shear
deformation. Acta Metallurgica and
Materialia, 42, 3595–3602.
19 Zavaliangos, A. and Lawley, A. (1995)
Numerical simulation of thixoforming.
Journal of Materials Engineering and
Performance, 4, 40–47.
20 Wahlen, A. (2000) Modelling the
thixotropic flow behaviour of semi-solid
aluminium alloys, in Proceedings of the
6th International Conference on Semisolid
Processing of Alloys and Composites
(eds G.L. Chiarmetta and M. Rosso), Turin,
27–29 September 2000, pp. 565–570.
21 Kirkwood, D.H., Ward, P.J., Barkhudarov,
M., Chin, S.B., Atkinson, H.V. and Liu, T.Y.
(2000) An initial assessment of the flow-3D
thixotropic model, in Proceedings of the
6th International Conference on Semisolid
Processing of Alloys and Composites
(eds G.L. Chiarmetta and M. Rosso), Turin,
27–29 September 2000, pp. 545–551.
22 Burgos, G.R., Alexandrou, A.N. and Entov,
V. (2001) Thixotropic rheology of semisolid
metal suspensions. Journal of
Materials Processing Technology, 111,
164–176.
23 De Gennes, P.G. (1979) Scaling Concepts in
Polymer Physics, Cornell University Press,
Ithaca, NY.
24 Stauffer, D. (1985) Introduction to
Percolation Theory, Taylor and Francis,
London.
25 Favier, V., Rouff, C., Bigot, R., Berveiller,
M. and Robelet, M. (2004) Micro–macro
modelling of the isothermal steady-state
behaviour of semi-solids. International
Journal of Forming Processes, 7, 177–194.
26 Berveiller, M. and Zaoui, A. (1981) A
simplified self-consistent scheme for the
plasticity of two-phase metals. Research
Mechanica Letters, 1, 119–124.
27 Christensen, R.M. and Lo, K.H. (1979)
Solutions for effective shear properties in
three-phase sphere and cylinder models.
Journal of Mechanics and Physics of Solids,
27, 315–330.
28 Cherkaoui, M., Sabar, H. and Berveiller, M.
(1994) Micromechanical approach of the
coated inclusion problem and applications
to composite materials. Journal of
Engineering Materials and Technology, 116,
274–278.
29 Laxmanan, V. and Flemings, M. (1980)
Deformation of semi-solid Sn–15 pct Pb
alloy. Metallurgical Transactions A, 11,
1927–1937.
30 Ghosh, D., Fan, R. and Vanschilt, C. (1994)
Thixotropic properties of semi-solid
magnesium alloys AZ91D and AM50, in
Proceedings of the 3rd International
Conference on Semi-solid Processing of
Alloys and Composites (ed. M. Kiuchi),
Tokyo, 13–15 June 1994, pp. 85–94.
31 Lucas, L.D. (1984) Viscosite des principaux
metaux et metallo€ıdes, Techniques
de l Ingenieur, MB1 M66.
32 Loue, W.R. Landkroon, S., Kool, W.H.
(1992) Rheology of Partially solidified
AlSi7Mg0.3 and the influence of SiC
additions. Materials Science and
Engineering, A151, 255–262.
33 Kirkwood, D.H. (1994) Semi-solid metal
processing. International Material Reviews,
39, 173–189.
34 Liu, T.Y., Atkinson, H.V., Kapranos, P.,
Kirkwood, D.H. and Hogg, S.C. (2003)
Rapid compression of aluminum alloys
and its relationship to thixoformability.
Metallurgical Materials Transactions A, 34,
1545–1554.
35 Cezard, P., Bigot, R., Favier, V. and Robelet,
M. (2006) Thixoforming of steel –
influence of thermal parameters. Solid
State Phenomena, 116–117, 721–724.
36 Cezard, P., Favier, V., Balan, T., Bigot, R.
and Berveiller, M. (2005) Simulation of
semi-solid thixoforging using a
micro–macro constitutive equation.
Computational Materials Science, 32,
323–328.