Thixoforming : Semi-solid Metal Processing

29 Belkind, A., Freilich, A. and Scholl, R.
(1998) Pulse duration effects in pulsepower
reactive sputtering of Al 2O 3. Surface
and Coatings Technology, 108–109,
558–563.
30 Bobzin, K., Lugscheider, E., Maes, M. and
Immich, P. (2006) Alumina PVD tool
coatings for the use in semi solid metal
forming of steel. Journal of Solid State
Phenomena, 7, 704–707.
31 Bobzin, K., Lugscheider, E., Maes, M. and
Piñero, C. (2006) Relation of hardness and
oxygen flow of H 2O 3 coatings deposited by
reactive bipolar pulsed magnetron
sputtering. Thin Solid Films, 494, 255–262.
32 Wong, M.S., Chia, W.J., Yashar, P.,
Schneider, J.M., Sproul, W.D. and Barnett,
S.A. (1996) High-rate reactive DC
magnetron sputtering of ZrO x coatings.
Surface and Coatings Technology, 86–87,
381–387.
33 Koski, K., H€ols€a, J. and Juliet, P. (1999)
Properties of zirconium oxide thin films
deposited by pulsed reactive magnetron
sputtering. Surface and Coatings Technology,
120–121, 303–312.
34 Schofield, M.A., Aita, C.R., Rice, P.M. and
Gajdardziska-Josifovska, M. (1998)
Transmission electron microscopy study
of zirconia–alumina nanolaminates grown
by reactive sputter deposition. Part I:
zirconia nanocrystallite growth
morphology. Thin Solid Films, 326,
106–116.
35 Kopp, R., Shimahara, H., Schneider, J.,
Kurapov, D., Telle, R., M€unstermann, S.,
Lugscheider, E., Bobzin, K. and Maes, M.
(2004) Characterization of steel
thixoforming tool materials by high
temperature compression tests. Steel
Research International, 75, 569–576.
36 Lugscheider, E., Baerwulf, S., Bobzin, K.
and Hornig, T. (2000) PVD-hard coatings
protecting the surface of thixoforming
tools. Advanced Engineering Materials, 2,
33–37.
37 Lugscheider, E., Bobzin, K., Maes, M. and
Immich, P. (2006) Developing PVD
zirconium-oxide coatings for use of
Referencesj305
thixoforming of steel, Proceedings of the
International Tooling Conference,
pp. 449–456.
38 Knauf, F., Hirt, G., Immich, P. and Bobzin,
K. Analysis and benchmark of the
influence of process variables for
thixoextrusion of steel, ESAFORM 2007.
Proceedings of the 10th ESAFORM
Conference on Materials Forming,
pp. 1173–1178.
39 Kramer, B.M. and Judd, P.K. (1985)
Computational design of wear coatings.
Journal of Vacuum Science and Technology A,
3, 2439–2444.
40 M€uller, J. and Neusch€utz, D. (2003)
Efficiency of a-alumina as diffusion
barrier between bond coat and bulk
material of gas turbine blades. Vacuum, 71,
247–251.
41 Shaw, L. and Abbaschian, R. (1995) Al2O 3
coatings as diffusion barriers deposited
from particulate-containing sol–gel
solutions. Journal of the American Ceramic
Society, 78, 3376–3382.
42 Funk, R., Schachner, C., Triquet, C.,
Kornmann, M. and Lux, B. (1976) Coating
of cemented carbide cutting tools with
alumina by chemical vapor deposition.
Journal of the Electrochemical Society, 123,
285–289.
43 Kyrylov, O., Cremer, R. and Neusch€utz, D.
(2002) Influence of thin coatings deposited
by PECVD on wear and corrosion
resistance of moulds for semi-solid
processing, Proceedings of the 6th
International Tooling Conference,
pp. 863–869.
44 Kyrylov, O. (2003) Abscheidung und
Charakterisierung von PECVD-
Aluminiumoxidschichten. PhD Thesis,
RWTH Aachen University.
45 Bleck, W. and P€uttgen, W. (2004)
Fundamentals of thixoforming processes.
Steel Research International, 75, 531–536.
46 Quirmbach, P., Telle, R., Mertens, H.P.
and Kopp, R. (1995) Rheocasting – Eine
Herausforderung an keramische
Formwerkzeuge. Keramische Zeitschrift, 47,
891–897.