Thixoforming : Semi-solid Metal Processing

66 Kurapov, D. and Schneider, J.M. (2004)
Adhesion and thermal shock resistance of
Al 2O 3 thin films deposited by PACVD for
die protection in semi-solid processing of
steel. Steel Research International, 75, 577.
67 Lesniak, C. and Schmalzried, C. (2007)
Non-oxide ceramics for high temperature
metallurgical processes. In: Heinrich, J.G
and Aneziris, C. (Eds.) Proc. 10 th ECerS
Conf., G€oller-Verlag, Baden-Baden, 2007,
2206–2211, ISBN 3-87264-022-4.
68 Salmang, H., Scholze, H. and Telle, R.
(2006) Keramik, Neuauflage, Springer,
Berlin.
69 Routschka, G. (ed.) (2004) Pocket Manual of
Refractory Materials – Basics, Structure,
Properties, 2nd edn, Vulkan Verlag, Essen.
70 Beyer, C. (2005) Entwicklung
prozessoptimierter
Werkzeugtechnologien anhand eines
seriennahen Zielbauteiles beim
Thixoschmieden von Stahl. PhD Thesis,
RWTH Aachen University.
71 Behrens, B.-A., Haller, B., Fischer, D. and
Schober, R. (2004) Investigations on steel
grades and tool materials for thixoforging,
Proceedings of the 8th International
Conference on Semi-solid Processing of
Alloys and Composites (S2P), Limassol,
21–23 September 2004, TMS Publications,
Warrendale, PA.
72 Kapranos, P. (2005) Thixoforming of high
melting point alloys. Journal of the Japan
Foundry Engineering Society, 77, 518–525.
73 Rassili, A., Adam, L., Fischer, D., Robelet,
M., Demurger, J., Cucatto, A., Klemm, H.,
Walkin, B., Karlsson, M. and Fl€uss, A.
(2004) Improvement of materials and tools
for thixoforming of steels, Proceedings of
the 8th International Conference on Semisolid
Processing of Alloys and Composites
(S2P), Limassol, 21–23 September 2004,
TMS Publications, Warrendale, PA.
74 Lobert, M. and Telle, R. (2004)
Investigation of tribological attack of Si3N4
dies during thixoforging of steel,
Proceedings of the 47th International
Colloquium on Refractories, Aachen,
pp. 218–221.
Referencesj307
75 Behrens, B.A., Haller, B. and Fischer, D.
(2004) Thixoforming of steel using
ceramic tool materials. Steel Research
International, 75 (8/9), 561–568.
76 Behrens, B.A., Fischer, D., Haller, B.,
Rassili, A., Pierret, J.C., Klemm, H.,
Studinski, A., Walkin, B., Karlsson, M.,
Robelet, m., natale, l. and alpini, f. (2006)
series Production of Thixoformed Steel
Parts. Solid State Phenomena, 116–117,
686–689.
77 Biswas, S.K., Mukerji, J. and Das, P.K.
(1994) Oxidation of silicon nitride sintered
with yttria and magnesia containing
nitrogen rich liquid. Key Engineering
Materials, 89–91, 271–274.
78 Singhal, S.C. (1977) Oxidation of silicon
nitride and related materials, Proceedings
of the NATO Advanced Study Institute on
Nitrogen Ceramics, 16–27 August 1976,
University of Kent, Canterbury, Riley, F.L.
(ed.), Noordhoff International Publishing,
Leyden, pp. 607–626.
79 Nickel, K.G., Fu, Z. and Quirmbach, P.
(1993) High-Temperature Oxidation and
Corrosion of Engineering Ceramics.
Journal of Engineering for Gas Turbines and
Power, 115, 76–82.
80 Grieveson, P. (1977) Some considerations
of the thermodynamics of gas–solid
reactions, Proceedings of the NATO
Advanced Study Institute on Nitrogen
Ceramics, 16–27 August 1976, University
of Kent, Canterbury, Riley, F.L. (ed.),
Noordhoff International Publishing,
Leyden, pp. 153–174.
81 Schiepers, R.C.J., van Beek, F.J.J., van Loo,
F.J.J. and de With, G. (1993) The
interaction between SiC and Ni, Fe, (Fe,Ni)
and steel: morphology and kinetics.
Journal of the European Ceramic Society, 11,
211–218.
82 Schiepers, R.C.J., van Loo, F.J.J. and de
With, G. (1988) Reactions between
a-silicon carbide ceramic and nickel or
iron. Journal of the American Ceramic
Society, 71, C284–C287.
83 Meyer-Rau, S., M€unstermann, S. and Telle,
R. (2002) Study on the behaviour of