Thixoforming : Semi-solid Metal Processing

308j 8 Tool Technologies for Forming of Semi-solid Metals
ceramic materials in contact with solid and
molten aluminium alloy, Stahl und Eisen
Special: refractories for ironmaking,
foundries and non-iron metallurgy,
Proceedings of the 45th International
Colloquium on Refractories, Aachen,
pp. 20–24.
84 M€unstermann, S. and Telle, R. (2004) A
ceramic tool concept for the thixoforming
of steel, Proceedings of 8th International
Conference on Semi-solid Processing of
Alloys and Composites (S2P), Limassol,
21–23 September 2004, TMS Publications,
Warrendale, PA.
85 Telle, R., M€unstermann, S. and Beyer, C.
(2006) Design, construction and
performance of Si 3N 4 tool parts in steel
thixoforming processes. Solid State
Phenomena, 116–117, 690–695.
86 Guo, Y., Long, S. and Telle, R. (2005)
Effect of dopants on the corrosion
behaviour of zirconia by steel at high
temperature. Key Engineering Materials,
280–283, 999–1004.
87 Miwa, K. and Kawamura, S. (2000) Semisolid
extrusion forming process of
stainless steel, Proceedings of 6th
International Conference on Semi-solid
Processing of Alloys and Composites
(S2P), Turin, 27–29 September 2000, pp.
279–281.
88 Rouff, C., Bigot, R., Favier, V. and Robelet,
M. (2002) Characterization of thixoforging
steel during extrusion tests, Proceedings of
the 7th International Conference on Semisolid
Processing of Alloys and
Composites (S2P), Tsukuba, A-56,
pp. 355–360.
89 Sugiyama, S., Li, J.Y. and Yanagimoto, J.
(2004) Semi-solid state extrusion of plain
carbon steel, Proceedings of the 8th
International Conference on Semi-solid
Processing of Alloys and Composites
(S2P), TMS Publications, Warrendale, PA.