Thixoforming : Semi-solid Metal Processing

References
1 Atkinson, H.V. (1999) Proceedings of the
International Conference on the Synthesis
of Lightweight Metals III (eds F.H. Froes,
C.M. Ward-Close, P.G. McCormick and D.
Eliezer), Minerals, Metals and Materials
Society, pp. 205ff.
2 Atkinson, H.V. (2005) Modelling the semisolid
processing of metallic alloys. Progress
in Materials Science, 50 (3), 341.
3 Spencer, D.B., Mehrabian, R. and
Flemings, M.C. (1972) Rheological
behavior of Sn–15 Pct Pb in the
crystallization range. Metallurgical and
Material Transactions B, 3 (7), 1925.
4 Loue, W.R., Landkroon, S. and Kool, W.H.
(1992) Rheology of partially solidified
AlSi7Mg0.3 and the influence of SiC
additions. Materials Science and
Engineering A, 151 (2), 255.
5 Kirkwood, D.H. (1994) Semi-solid metal
processing. International Materials Review,
39 (5), 173.
6 Mada, M. and Ajersch, F. (1996)
Rheological model of semi-solid A356–SiC
composite alloys. Part I: dissociation of
agglomerate structures during shear.
Materials Science and Engineering A, 212 (1),
157.
7 Suery, M., Martin, C.L. and Salvo, L. (1996)
Overview of the rheological behaviour of
globular and dendritic slurries.
Proceedings of the 4th International
Conference on Semi-solid Processing of
Alloys and Composites, Sheffield, 19–21
June 1996, pp. 21–29.
8 Brabazon, D., Browne, D.J. and Carr, A.J.
(2003) Experimental investigation of the
transient and steady state rheological
behaviour of Al–Si alloys in the mushy
state. Materials Science and Engineering A,
356 (1–2), 69.
9 Hufschmidt, M., Modigell, M. and Petera,
J. (2006) Modelling and simulation of
forming processes of metallic suspensions
under non-isothermal conditions. Journal
of Non-Newtonian Fluid Mechanics, 134
(1–3), 16–26.
Referencesj217
10 Quaak, C.J., Katgerman, L. and Kool, W.H.
(1996) Viscosity evolution of partially
solidified aluminium slurries after a
shear rate jump. Proceedings of the
4th International Conference on Semi-
Solid Processing of Alloys and
Composites, Sheffield, 19–21 June 1996,
p. 35.
11 Koke, J. (2001) Rheologie teilerstarrter
Metalllegierungen, in Fortschritt-Berichte,
VDI. Reihe, 5(620).
12 Koke, J. and Modigell, M. (2003) Flow
behaviour of semi-solid metal alloys.
Journal of Non-Newtonian Fluid Mechanics,
112 (2–3), 141.
13 Kumar, P., Martin, C.L. and Brown, S.
(1993) Shear rate thickening flow
behaviour of semi-solid slurries.
Metallurgical and Materials Transactions A,
24 (5), 1107.
14 Barnes, H.A. and Walters, K. (1985) The
yield stress myth? Rheologica Acta, 24 (4),
323–326.
15 Cheng, D.V.-H. (1986) Yield Stress: a timedependent
property and how to measure it.
Rheologica Acta, 25 (5), 542–554.
16 Barnes, H.A. (1997) Thixotropy. A review.
Journal of Non-Newtonian Fluid Mechanics,
70 (1–2), 1.
17 Denny, D.A. and Brodkey, R.S. (1962)
Kinetic interpretation of non-Newtonian
flow. Journal of Applied Physics, 33 (7), 2269.
18 Mewis, J. and Schryvers, J. (1996)
Unpublished International Fine Particle
Research Report.
19 Moore, F. (1959) The rheology of ceramic
slips and bodies. Transactions of the British
Ceramic Society, 58, 470.
20 Bingham, E.C. (1922) Fluidity and
Plasticity, 1st edn, McGraw-Hill, New York,
p. 125.
21 Oh, S.I., Rebelo, N.M. and Kobayashi, S.
(1978) Finite-element formulation for the
analysis of plastic deformation at ratesensitive
materials in metal forming.
IUTAM Symposium, Tutzing, Germany,
pp. 273ff.