Thixoforming : Semi-solid Metal Processing

442j 11 Thixoextrusion
GPa pressure
W/m 2 K heat transfer coefficient
Hz frequency
W/kW power
% percent
References
1 Lange, K. (1985) Handbook of Metal
Forming, Society of Manufacturing
Engineers, Dearborn, MI.
2 Kiuchi, M., Sugiyama, S. and Arai, K.
(1979) Study of metal forming in the
mashy-state; 2nd Report. Extrusion of
tube, bar and wire of alloys in mashy-state,
Proceedings of the 20th International
Machine Tool Design Conference.
3 Kiuchi, M. and Sugiyama, S. (1994)
Proceedings of the 3rd International
Conference on Semi-solid Processing of
Alloys and Composites, pp. 245–257.
4 M€oller, T. (2004) Verfahrensentwicklung
und Ermittlung des thermischen
Prozessfensters beim
Thixostrangpressen, Dissertation, RWTH
Aachen.
5 Miwa, K. and Kawamura, S. (2000)
Proceedings of the 6th International
Conference on Semi-solid Processing of
Alloys and Composites, pp. 279–281.
6 Rouff, C., Bigot, R., Favier, V. and Robelet,
M. (2002) Proceedings of the 7th
International Conference on Semi-solid
Processing of Alloys and Composites, A63,
pp. 355–360.
7 Abdelfattah, S., Robelet, M., Rassili, A. and
Bobadilla, M. (2000) Proceedings of the 6th
International Conference on Semi-solid
Processing of Alloys and Composites, pp.
283–288.
8 Sugiyama, S., Li, J.Y. and Yanagimoto, J.
(2004) Proceedings of the 8th International
Conference on Semi-solid Processing of
Alloys and Composites, TMS Publications,
Warrendale, PA.
9 Knauf, F., Baadjou, R. and Hirt, G. (2008)
Proceedings of the 10th International
Conference on Semi-solid Processing of
Alloys and Composites.
10 M€unstermann, S., Telle, R., Knauf, F. and
Hirt, G. (2008) Proceedings of the 10th
International Conference on Semi-solid
Processing of Alloys and Composites.
11 P€uttgen, J.T.W., Hallstedt, B., Bleck, W. and
Uggowitzer, P.J. (2007) Acta Materialia, 55,
1033–1042.
12 Knauf, F., Hirt, G., Immich, P. and Bobzin,
K. (2007) Influence of tool geometry, tool
coating and process parameters in
thixoextrusion of steel, Proceedings of
ESAFORM.
13 Shimahara, H. (2007) Personal
communication.
14 Thome, R. (1998) Einfluss der chemischen
Zusammensetzung und der
Abk€uhlbedingungen auf die
Rissanf€alligkeit von Werkzeugst€ahlen
beim Stranggiessen und bei der
Warmumformung, Dissertation, RWTH
Aachen.
15 Uhlenhaut, D.I., Kradolfer, J., P€uttgen, W.,
L€offler, J.F. and Uggowitzer, P.J. (2006)
Acta Materialia 54 (10), 2727–2734.
16 Shimahara, H., Baadjou, R. and Hirt, G.
(2006) Solid State Phenomena, 116–117,
189–192.