Thixoforming : Semi-solid Metal Processing

35 Kleiner, S., Beffort, O. and Uggowitzer, P.
(2004) Microstructure evolution during
reheating of an extruded Mg–Al–Zn alloy
into the semi-solid state. Scripta Materialia,
51, 405–410.
36 P€uttgen, W., Bleck, W., Seidl, I., Kopp, R.
and Bertrand, C. (2005) Thixoforged
damper brackets made of the steel grades
HS6-5-3 and 100Cr6. Advanced Engineering
Materials, 7 (8), 726–735.
37 Salvo, L., Suery, M., De Charentenay, Y. and
Loue, W. (1996) Microstructural evolution
and rheological behaviour in the semi-solid
state of a new Al-Si based alloy. Proceedings
of the 4th International Conference on
Semi-solid Processing of Alloys and
Composites, Sheffield, pp. 10–15.
38 Maire, E., Buffiere, J., Salvo, L., Blandin, J.,
Ludwig, W. and Letang, J. (2001) On the
application of X-ray microtomography in
the field of materials science. Advanced
Engineering Materials, 3 (8), 539–546.
39 Gurland, J. (1958) The measurement of
grain contiguity in two-phase alloys.
Transactions of the Metallurgical Society of
Aime, 8, 452–455.
40 Underwood, E. (1970) Quantitative
Stereology, Addison-Wesley, Reading, MA.
41 Gurland, J. (1979) A structural approach to
the yield strength of two-phase alloys with
coarse microstructures. Materials Science
and Engineering, 40 (9), 59–71.
42 Wolfsdorf, T., Bender, W. and Voorhees, P.
(1997) The morphology of high volume
fraction solid-liquid mixtures: an
application of microstructural
tomography. Acta Materialia, 45,
2279–2295.
43 Gullo, G., Steinhoff, K. and Uggowitzer,
P.J. (2000) Microstructural changes during
reheating of semi-solid alloy AA6082
modified with barium. Proceedings of the
6th International Conference on Semisolid
Processing of Alloys and Composites,
Turin, pp. 367–372.
44 Poech, M. and Ruhr, D. (1994) Die
quantitative Charakterisierung der
Gef€ugeanordnung. Praktische
Metallographie, 31 (2), 70–77.
Referencesj103
45 Kulmburg, W. (1998) Das Gef€uge der
Werkzeugst€ahle – Ein Überblick f€ur den
Praktiker: Teil 1: Einteilung, Systematik und
W€armebehandlung der Werkzeugst€ahle.
Praktische Metallographie, 35 (4), 181–202;
(1998) Teil 2: Besonderheiten des Gef€uges
der einzelnen Stahlgruppen. Praktische
Metallographie, 35, (5),267–279.
46 Kulmburg, A. (1982) VDI-Berichte, 432,
31–43.
47 Berns, H. and Trojahn, W. (1985) Einfluss
der W€armebehandlung auf Restaustenit,
Verschleißwiderstand und mechanische
Eigenschaften ledeburitischer
Chromst€ahle. HTM, 40 (2), 62–72.
48 Haberling, E. and Wiegand, H. (1983)
Thyssen Edelstahl Technische Berichte, 9,
89–95.
49 Berns, H. (1974) Restaustenit in
ledeburitischen Chromst€ahlen und seine
Umwandlung durch Kaltumformen,
Tiefk€uhlen und Anlassen. HTM, 29 (4),
236–247.
50 Shimahara, H. and Kopp, R. (2004)
Investigations of basic data for the semisolid
forming of steels. Proceedings of the
8th International Conference on Semisolid
Processing of Alloys and Composites,
Limassol.
51 Werkstoffdatenblatt K107 http://www.
boehler.de, (2006).
52 Lecomte-Beckers, J., Rassili, A., Carbon, M.
and Robelet, M. (2004) Characterization of
thermophysical properties of semi-solid
steel for thixoforming. Proceedings of the
8th International Conference on Semi-solid
Processing of Alloys and Composites,
Limassol.
53 Hengerer, F. (2002) W€alzlagerstahl
100Cr6 – Ein Jahrhundert
Werkstoffentwicklung. HTM, 57 (3),
144–155.
54 Vetters, H. (2002) Umwandlungsgef€uge
des W€alzlagerstahls 100Cr6 nach ein- und
zweifacher Austenitisierung. HTM, 57 (3),
168–173.
55 Hengerer, F., Lucas, G. and Nyberg, B.
(1974) Zwischenstufenumwandlung von
W€alzlagerst€ahlen. HTM, 29 (2), 71–79.