Thixoforming : Semi-solid Metal Processing

References
1 Koesling, D., Tinius, H.C., Cremer, R.,
Hirt, G., Morjan, U., Nohn, B.,
Wittstamm, Th. and Witulski, T. (1999)
Final Technical Report P 322/08/96/S 24/
23/95, Verlag und Vertriebsgesellschaft,
D€usseldorf.
2 Hartmann, D., Morjan, U., Nohn, B.,
Zimmer, M., Hoffmann, A. and Braun, R.
(2002) Final Technical Report P 483/11/
2000/S 24/28/9, Verlag und
Vertriebsgesellschaft, D€usseldorf.
3 Neudenberger, D. (2001) Rheologische
Untersuchungen und Einfl€usse auf das
Prozessfenster zum Thixoschmieden und
Thixoquerfliesspressen, Dissertation,
RWTH-Aachen, Institut f€ur Bildsame
Formgebung.
4 Baadjou, R., Shimahara, H. and Hirt, G.
(2006) Automated semi-solid forming of
steel components by means of
thixojoining, Proceedings of the 9th
International Conference on Semi-solid
Alloys and Composites (S2P). Solid State
Phenomena, 116–117, 383–386.
5 Hirt, G., Nohn, B. and Witulski, T. (1999)
Herstellung komplexer Stahlbauteile
durch Thixoforming, VDI-Tagung (Rapid-
Prototyping – Verk€urzte Fertigungsketten
durch INSTANT-Produktion), D€usseldorf,
25. M€arz.
6 Brooks, D., Michael, M. and Wienstr€oer,
M. (1999) Process Modeling for Forging
Using Rapid Simulation, 16.
Umformtechnisches Kolloquium
Hannover (Umformtechnik an der
Schwelle zum n€achsten Jahrtausend), 25.
und 26. Februar.
7 Flemings, M.C., Boylan, J.F. and Bye, R.L.
(1978) Thixocasting Steel Parts, Final
Technical Report, Massachusetts Institute
of Technology, Cambridge, MA.
8 Breuer, H.-W. and Peddinghaus, J. (1999)
Entwicklung und Fertigung komplexer
Stahlschmiedeteile, 16.
Umformtechnisches Kolloquium
Hannover (Umformtechnik an der
Referencesj407
Schwelle zum n€achsten Jahrtausend), 25.
und 26. Februar, pp. 159–167.
9 Young, K.P., Riek, R.G. and Flemings,
M.C. (1979) Structure and properties of
thixocast steels. Metals Technology, 6
(44),130137.
10 Flemings, M.C. (1991) Behavior of metal
alloys in the semisolid state. Metallurgical
Transactions A, 22 (5), 957.
11 Hirt, G. et al. (2005) Semi-solid forging of
100Cr6 and X210CrW12 steel. CIRP, 54/1,
257–260.
12 Seidl, I., Kallweit, J. and Kopp, R. (2002)
New potentials for steel forming:
application for semisolid forming and
joining at the RWTH Aachen, Proceedings
of the 7th International Conference on
Semi-solid Processing of Alloys and
Composites (S2P), pp. 341–342.
13 P€uttgen, W. et al. (2005) Thixoforged
damper brackets made of the steel grades
HS6-5-3 and 100Cr6. Advanced Engineering
Materials, 7 (8), 726–735.
14 Omar, M.Z. et al. (2005) Thixoforming of a
high performance HP9/4/30 steel.
Materials Science and Engineering, A395,
53–61.
15 Kiuchi, M., Sugiyama, S. and Arai, M.
(1996) Mushy-state forging of cast-iron.
Journal of the JSTP, 37 (430), 1219–1224.
16 Rassili, A., Robelet, M. and Fischer, D.
(2006) Steel grades adapted to the
thixoforging process: metallurgical
structures and mechanical properties,
Proceedings of the 9th ESAFORM
Conference, Glasgow, pp. 819–822.
17 Tsuchiya, M., Ueno, H. and Takagi, I.
(2003) Research of semi-solid casting of
iron. JSAE Review, 24, 205–214.
18 Omar, M.Z., Atkinson, H.V., Palmiere,
E.J., Howe, A.A. and Kapranos, P. (2006)
Thixoforming two different steels. in 9th
International Conference on Metal
Forming, ESAFORM 2006, pp. 847–850.
19 LeBeau, S. and Walukas, D.M. (1999)
Thixomoulding of magnesium