Introduction to Acoustics

sound power levels of noise sources using sound
pressure – Engineering method in an essentially
free field over a reflecting plane (ISO, Geneva 1994)
ISO: ISO 3745:2003 Acoustics – Determination of
sound power levels of noise sources using sound
pressure – Precision methods for anechoic and
hemi-anechoic rooms (ISO, Geneva 2003)
ISO: ISO 3746:1995 Acoustics – Determination of
sound power levels of noise sources using sound
pressure – Survey method using an enveloping
measurement surface over a reflecting plane (ISO,
Geneva 1995)
ISO: ISO 3746:1995/Cor 1:1995 (ISO, Geneva 1995)
ISO: ISO 3747:2000 Acoustics – Determination of
sound power levels of noise sources using sound
pressure – Comparison method in situ (ISO, Geneva
2000)
23.18 M.A. Nobile, B. Donald, J.A. Shaw: The cylindrical
microphone array: A proposal for use in
international standards for sound power measurements,
Proc. NOISE-CON 2000 (CD-ROM) (Int. Inst.
Noise Control Eng., West Lafayette 2000), paper
1pNSc2
23.19 M.A. Nobile, J.A. Shaw, R.A. Boyes: The cylindrical
microphone array for the measurement of
sound power level: Number and arrangement
of microphones, Proc. INTER-NOISE 2002 (CD-ROM)
(Bookmaster, Mansfield 2002), paper N318
23.20 ISO: ISO 9614: Determination of sound power levels
of noise sources using sound intensity Part 1:
Measurement at discrete points (ISO, Geneva 1993)
23.21 ISO: ISO 9614: Determination of sound power levels
of noise sources using sound intensity Part 2:
Measurement by scanning (ISO, Geneva 1994)
23.22 ISO: ISO 9614: Determination of sound power levels
of noise sources using sound intensity Part 3: Precision
method for measurement by scanning (ISO,
Geneva 2000)
23.23 ECMA: ECMA-160: Determination of Sound Power
Levels of Computer and Business Equipment using
Sound Intensity Measurements; Scanning Method
in Controlled Rooms, 2nd edn. (ECMA International,
Geneva 1992), A free download is available from
www.ecma-international.org
23.24 F. Jacobsen: Sound field indicators, useful tools,
Noise Control Eng. J. 35, 37–46 (1990)
23.25 A.C. Balant, G.C. Maling, D.M. Yeager: Measurement
of blower and fan noise using sound intensity
techniques, Noise Control Eng. J. 33, 77–88
(1989)
23.26 ISO: ISO 5136:2003, Acoustics – Determination of
sound power radiated into a duct by fans and other
air moving devices – Induct method (ISO, Geneva
2003)
23.27 ISO: ISO 5136:2003, Acoustics – Determination of
sound power radiated into a duct by fans and other
air moving devices – Induct method (ISO, Geneva
2003), Section 6.2
23.28 P.K. Baade: Effects of acoustic loading on axial flow
fan noise generation, Noise Control Eng. J. 8, 5–15
(1977)
23.29 ISO: ISO 11200:1995 Acoustics – Noise emitted by
machinery and equipment – Guidelines for the use
of basic standards for the determination of emission
sound pressure levels at a work station and at
other specified positions. ISO 11200:1995/Cor 1:1997
(ISO, Geneva 1995)
23.30 ISO: ISO 11201:1995 Acoustics – Noise emitted by machinery
and equipment – Measurement of emission
sound pressure levels at a work station and at
other specified positions – Engineering method in
an essentially free field over a reflecting plane. ISO
11201:1995/Cor 1:1997 (ISO, Geneva 1995)
23.31 ISO: ISO 11202:1995 Acoustics – Noise emitted by machinery
and equipment – Measurement of emission
sound pressure levels at a work station and at
other specified positions – Survey method in situ.
ISO 11202:1995/Cor 1:1997 (ISO, Geneva 1995), Applies
to French version only
23.32 ISO: ISO 11203:1995 Acoustics – Noise emitted by
machinery and equipment – Determination of
emission sound pressure levels at a work station
and at other specified positions from the sound
power level (ISO, Geneva 1995)
23.33 ISO: ISO 11204:1995 Acoustics – Noise emitted by
machinery and equipment – Measurement of
emission sound pressure levels at a work station
and at other specified positions – Method requiring
environmental corrections. ISO 11204:1995/Cor
1:1997 (ISO, Geneva 1995)
23.34 ISO: ISO 11205:2003 Acoustics – Noise emitted by
machinery and equipment – Engineering method
for the determination of emission sound pressure
levels in situ at the work station and at other specified
positions using sound intensity (ISO, Geneva
2003)
23.35 ISO: ISO 362:1998 Acoustics – Measurement of noise
emitted by accelerating road vehicles – Engineering
method (ISO, Geneva 1998)
23.36 ISO: ISO 5128:1980 Acoustics – Measurement of noise
inside motor vehicles (ISO, Geneva 1980)
23.37 ISO: ISO 5130:1982 Acoustics – Measurement of
noise emitted by stationary road vehicles – Survey
method (ISO, Geneva 1982)
23.38 ISO: ISO 7188:1994 Acoustics – Measurement of noise
emitted by passenger cars under conditions representative
of urban driving (ISO, Geneva 1994)
23.39 ISO: ISO 9645:1990 Acoustics – Measurement of
noise emitted by two wheeled mopeds in motion –
Engineering method (ISO, Geneva 1990)
23.40 ISO: ISO 10844:1994 Acoustics – Specification of test
tracks for the purpose of measuring noise emitted
by road vehicles (ISO, Geneva 1994)
23.41 ISO: ISO 11819-1:1997 Acoustics – Measurement of
the influence of road surfaces on traffic noise – Part
1: Statistical Pass-By method (ISO, Geneva 1997)
Noise References 1011
Part G 23