Introduction to Acoustics

in impedance tubes – Part 2: Transfer function
method (ISO, Geneva 1998)
23.131 ASTM E 1050-98:2003: Standard test method for
impedance and absorption of acoustical materials
using a tube, two microphones, and a digital
analyzer system (Am. Soc. Testing and Materials,
Philadelphia 2003)
23.132 ISO: ISO 354:2003. Acoustics – Measurement of
sound absorption in a reverberation room (ISO,
Geneva 2003)
23.133 M.A. Nobile: Measurement of the spherical wave
absorption coefficient at oblique incidence using
the two-microphone transfer function method,
Proc. INTER-NOISE 89 (Int. Inst. Noise Control Eng.,
Newport Beach 1989) pp. 1067–1072
23.134 K.U. Ingard: Notes on duct attenuators-N4
(www.ingard.com, 1999) CD-ROM
23.135 ISO: ISO 7235:2003 Acoustics – Laboratory measurement
procedures, for ducted silencers and
air-terminal units – Insertion loss, flow noise and
total pressure loss (ISO, Geneva 2003)
23.136 ISO: ISO 11691:1995 Acoustics – Measurement of insertion
loss of ducted silencers without flow –
Laboratory survey method (ISO, Geneva 1995)
23.137 ISO: ISO 11820:1996 Acoustics – Measurements on
silencers in situ (ISO, Geneva 1996)
23.138 ISO: ISO 14163:1998 Acoustics – Guidelines for noise
control by silencers (ISO, Geneva 1998)
23.139 ASTM E477-99: Standard test method for measuring
acoustical and airflow performance of duct
liner materials and prefabricated silencers (Am.
Soc. Testing and Materials, Philadelphia 1999)
23.140 M. Hirschorn: The aeroacoustic rating of silencers
for "forward" and "reverse" flow of air and sound,
Noise Control Eng. 2, 25–29 (1974)
23.141 ANSI: ANSI S12.19-1996 (R2001). American National
Standard measurement of occupational noise exposure
(Acoust. Soc. Am., Melville 1996)
23.142 ANSI: ANSI S1.13-1995 (R1998). American National
Standard measurement of sound pressure levels in
air (Acoust. Soc. Am., Melville 1996)
23.143 ANSI: ANSI S12.9-1998 (R2003). Quantities and
procedures for description and measurement of
environmental sound, Part 1 (Acoust. Soc. Am.,
Melville 1998)
23.144 ANSI: ANSI S12.9-1992 (R2003). Quantities and
procedures for description and measurement of
environmental sound. Part 2, measurement of
long-term, wide area sound (Acoust. Soc. Am.,
Melville 1992)
23.145 ANSI: ANSI S12.9-1993 (R2003). Quantities and
procedures for description and measurement of
environmental sound. Part 3, short term measurements
with an observer present (Acoust. Soc. Am.,
Melville 1993)
23.146 ANSI: ANSI S12.9-1996 (R2001), Quantities and
procedures for description and measurement of
environmental sound. Part 4, noise assessment
and prediction of long term community response
(Acoust. Soc. Am., Melville 1996)
23.147 ANSI: ANSI S12.9-1998, Quantities and procedures
for description and measurement of environmental
sound. Part 5, sound level descriptors for determination
of compatible land use (Acoust. Soc. Am.,
Melville 1998)
23.148 ANSI: ANSI S12.9-1998 (R2003), Quantities and
procedures for description and measurement of
environmental sound. Part 6, methods for estimation
of awakenings associated with aircraft noise
events heard in homes (Acoust. Soc. Am., Melville
1998)
23.149 A.H. Suter: Hearing Conservation Manual, 4th edn.
(Council for Accreditation in Occupational Hearing
Conservation, Milwaukee 1993)
23.150 T.F.W. Embleton, Convenor: I-INCE Publication 97-
1, Technical Assessment of Upper Limits of Noise
in the Workplace, Noise News Int. 5, 203–216
(1997)
23.151 ISO: ISO 1999:1990(E). Acoustics – Determination
of occupational noise exposure and estimation of
noise induced hearing impairment (ISO, Geneva
1990)
23.152 ANSI: ANSI S3.44-1996 (R2001) American National
Standard determination of occupational noise exposure
and estimation of noise induced hearing
impairment (Acoust. Soc. Am., Melville 1998)
23.153 J.M. Fields: Reporting guidelines for community
noise reaction surveys, Noise News Int. 6, 139–144
(1998)
23.154 T.J. Schultz: Synthesis of social surveys on noise
annoyance, J. Acoust. Soc. Am. 64, 377–405
(1978)
23.155 L.S. Finegold, C.S. Harris, H.E. von Gierke: Community
annoyance and sleep disturbance: Updated
criteria for assessing the impacts of general transportation
noise on people, Noise Control Eng. J. 42,
25–30 (1994)
23.156 S. Fidell, D.S. Barber, T.J. Schultz: Updating a
dosage-effect relationship for the prevalence of
annoyance due to general transportation noise, J.
Acoust. Soc. Am. 89, 221–233 (1991)
23.157 H.M.E. Miedema: Noise & Health: How does noise
affect us? Proc. INTER-NOISE 01 (Int. Inst. Noise
Control Eng., The Hague 2001), paper in01_740
23.158 H.M.E. Miedema, C.G.M.Oudshoorn: Annoyance
from transportation noise: Relationships with exposure
metrics DNL and DENL and their confidence
intervals, Environmental Health 109, 409–416
(2001)
23.159 S. Fidell: Reliable prediction of community response
to noise: Why you can’t get there from here,
Proc. INTER-NOISE 02 (Int. Inst. Noise Control Eng.,
Dearborn 2002), paper N500
23.160 S. Fidell: The Schultz curve 25 years later: A research
perspective, J. Acoust. Soc. Am. 114, 3007–3015
(2003)
Noise References 1015
Part G 23