Handbook of Turbomachinery Second Edition Revised - Ventech!

REFERENCES
1. D. Childs, Turbomachinery Rotordynamics: Phenomena, Modeling, & Analysis,
John Wiley & Sons, New York (1993).
2. M. S. Darlow, Balancing of High-Speed Machinery, Springer-Verlag, New York
(1989).
3. J. P. Den Hartog, Mechanical Vibrations, McGraw-Hill Book Co., New York
(1956).
4. A. Dimaragonas, Vibration for Engineers, Prentice-Hall, Englewood Cliffs, NJ
(1996).
5. A. D. Dimaragonas and S. A. Paipetis, Analytical Methods in Rotordynamics,
Applied Science Publishers (1983).
6. F. F. Ehrich, Handbook of Rotordynamics, McGraw-Hill, New York (1992).
7. D. J. Ewins, Modal Testing: Theory and Practice, John Wiley & Sons,
Chichester, England (1984).
8. A. Fo¨ppl, ‘‘Das Problem der Laval’schen Turbinewelle,’’ Civilingenieur, 41:
332–342 (1985).
9. R. Gasch and H. Pfu¨tzner, Rotordynamik-Eine Einfu¨hrung, Springer-Verlag,
Berlin (1975).
10. R. Gasch, ‘‘Vibration of Large Turbo-Rotors in Fluid-Film Bearings on an
Elastic Foundation,’’ J. Sound and Vibration, 47(1): 53–73 (1976).
11. H. H. Jeffcott, ‘‘Lateral Vibration of Loaded Shafts in the Neighbourhood of a
Whirling Speed—The Effect of Want of Balance,’’ Philosophical Magazine,
37:304–314 (1919).
12. R. G. Loewy and V. J. Piarulli, Dynamics of Rotating Shafts, SVM-4, Shock
and Vibration Information Center, U.S. Department of Defense (1969).
13. H. D. Nelson and J. M. McVaugh, ‘‘The Dynamics of Rotor-Bearing Systems
Using Finite Elements,’’ ASME Trans. J. Engineering for Industry, 98(2): 593–
600 (1976).
14. H. D. Nelson, ‘‘A Finite Rotating Shaft Element Using Timoshenko Beam
Theory,’’ ASME Trans. J. Mechanical Design, 102: 793–803 (1980).
15. J. C. Nicholas, E. J. Gunter, and P. E. Allaire, ‘‘Effect of Residual Shaft Bow
on Unbalance Response and Balancing of a Single Mass Flexible Rotor: Part I
Unbalance Response,’’ J. Engineering for Power, April: 171–181 (1976).
16. J. C. Nicholas, E. J. Gunter, and P. E. Allaire, ‘‘Effect of Residual Shaft Bow
on Unbalance Response and Balancing of a Single Mass Flexible Rotor: Part II
Balancing,’’ J. Engineering for Power, April: 182–187 (1976).
17. K. E. Rouch and J. S. Kao, ‘‘Tapered Beam Element for Rotor Dynamics,’’ J.
Sound and Vibration, 66(1): 1–22 (1979).
18. M. C. Shaw and E. F. Macks, Analysis and Lubrication of Bearings, McGraw-
Hill, New York (1949).
19. A. Tondl, ‘‘Notes on the Identification of Subharmonic Responses of Rotors,’’
J. Sound and Vibration, 31(1): 119–127 (1973).
20. A. Tondl, Some Problems of Rotor Dynamics, Chapman and Hall, London (1965).
21. J. M. Vance, Rotordynamics of Turbomachinery, John Wiley & Sons, New York
(1988).
Copyright © 2003 Marcel Dekker, Inc.