04.03.2013 Views

install–38 - Ibm

install–38 - Ibm

install–38 - Ibm

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

v Do not overtighten the cable straps or bend the cables to a radius of less than 38<br />

mm (1.5 in.).<br />

v Do not put excess weight on the cable at the connection point. Be sure that the<br />

cable is well supported.<br />

Installing SFP modules<br />

The FAStT600 Storage Server host ports require Small Form-Factor Pluggable<br />

(SFP) Modules. SFP modules are used to convert electrical signals to optical<br />

signals that are required for fibre-channel transmission to and from RAID<br />

controllers. The FAStT600 Storage Server supports two types of SFP modules; one<br />

with a plastic latch and one with a wire latch. After you install the SFP modules, you<br />

will use fiber-optic cables to connect the FAStT600 Storage Server to other<br />

fibre-channel devices.<br />

Before you install SFP modules and fiber-optic cables, read the following<br />

information:<br />

v The SFP module housing has an integral guide key designed to prevent you from<br />

inserting the SFP module improperly.<br />

v Use minimal pressure when you insert the SFP module into a port. Forcing the<br />

SFP module into a port could cause damage to the SFP module or the port.<br />

v You can insert or remove the SFP module while the port is powered on.<br />

v The operational loop performance is not affected when you install or remove an<br />

SFP module.<br />

v You must insert the SFP module into a port before you connect the fiber-optic<br />

cable.<br />

v You must remove the fiber-optic cable from the SFP module before you remove<br />

the SFP module from the port. See “Removing SFP modules” on page 28 for<br />

more information.<br />

To install an SFP module, complete the following steps.<br />

Statement 3:<br />

CAUTION:<br />

When laser products (such as CD-ROMs, DVD drives, fiber-optic devices, or<br />

transmitters) are installed, note the following:<br />

v Do not remove the covers. Removing the covers of the laser product could<br />

result in exposure to hazardous laser radiation. There are no serviceable<br />

parts inside the device.<br />

v Use of controls or adjustments or performance of procedures other than<br />

those specified herein might result in hazardous radiation exposure.<br />

26 IBM TotalStorage FAStT600 Fibre Channel Storage Server: Installation and User’s Guide

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!