install–38 - Ibm

Lever
AC power
connector
Fault LED Fault LED
Strainrelief
clamp
AC power
switch
AC power
connector
AC power
Strain- switch
relief clamp
Levers
Use these locking handles to remove or install a power supply.
Power LED
These green LEDs light when the storage server is turned on and receiving
ac power.
Fault LEDs
These amber LEDs light if a power supply failure occurs or if the power
supply is turned off.
AC power switches
Use these switches to turn the power supplies on and off. You must turn on
both switches to take advantage of the redundant power supplies.
AC power connectors
This connection is for the ac power cord.
Strain-relief clamp
Use this clamp to provide strain relief on the power cord.
Removing a hot-swap power supply
Statement 8
Power LED
Figure 44. Power supply controls
Hot-swap power
supplies
Lever
56 IBM TotalStorage FAStT600 Fibre Channel Storage Server: Installation and User’s Guide
Power LED